협업
예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Screw Eye: Parmelee's One-Piece Wire Eye with a Stop-Ring
Forge

작성자

Forge

26. 10월 2026NO
20
0
0
0
0

Screw Eye: Parmelee's One-Piece Wire Eye with a Stop-Ring

A screw eye bent from one piece of wire, by Arthur W. Parmelee of Worcester, Massachusetts (US 350,209, 1886). One end is threaded to turn into wood, the other bent into a closed eye. His addition is a ring closed into a groove around the shank: it stops the screw at the right depth, looks neat, and is left a little loose so the eye can turn without marking the wood under it. The patent gives no metal or sizes. Iron wire, the 3 mm size, the pliers and the die are ours. The picture: Figs. 1-3 and 10-11 of the patent.
초급
30 minutes

안내

1

Cut a piece of wire

Cut a straight piece of iron wire about 3 mm thick (ours), long enough for the screw, the shank and the eye (Fig. 1).

이 단계의 재료:

철사철사1 개

필요한 도구:

자자
니퍼니퍼
2

Cut the groove

File a narrow groove right round the wire, a screw length from one end (Fig. 2). Parmelee cuts it or presses it in.

필요한 도구:

정밀 줄(니들 파일) 세트정밀 줄(니들 파일) 세트
바이스(만력)바이스(만력)
3

Point the screw end

File that end to a tapering point (Fig. 3).

필요한 도구:

금속용 줄금속용 줄
바이스(만력)바이스(만력)
4

Thread the screw end

Cut a screw thread on the pointed end "in the usual way". Ours: a die in a die stock, run on as far as the point allows.

필요한 도구:

다이스 홀더다이스 홀더
바이스(만력)바이스(만력)
5

Bend the eye

Bend the other end into a closed round eye, the end turned in against the shank (Fig. 10).

필요한 도구:

둥근 코 펜치둥근 코 펜치
평집게평집게
6

Make the split ring

Bend a short piece of the same wire round into an open ring that just slips over the shank (Figs. 9 and 11).

이 단계의 재료:

철사철사1 개

필요한 도구:

니퍼니퍼
둥근 코 펜치둥근 코 펜치
7

Close the ring into the groove

Slide the ring onto the groove and squeeze it until its two ends meet in a continuous band. Leave it a little loose, so the eye turns while the ring stays still against the wood.

필요한 도구:

평집게평집게
8

Turn it into the wood

Turn the screw into the wood by the eye until the ring meets the surface: the ring is the depth stop. Parmelee also allows washers under the ring; we leave them out.

재료

1
  • 2 개
    플레이스홀더

필요 도구

8

이 블루프린트로 만드는 것

관련 블루프린트

이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...