예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Capped Fountain Horse Brush: Water Out Only Through the Bristles
Karen

작성자

Karen

6. 10월 2026SE
28
0
0
0
0

The Capped Fountain Horse Brush: Water Out Only Through the Bristles

A horse caked in mud is slow to clean with a dry brush, and a hose alone soaks the handler. Howard R. Danielson of Crookston, Minnesota, received US 987,967, patented 28 March 1911, for a horse brush "so constructed as to avoid leakage, and to provide no outlet for the water except through the bristles": a perforated wooden back under a steel cap whose bead sits in a groove round the back, held by a clamping wire and bolt, with a pipe clamped through the cap by washers and nuts; loosening the wire lets a worn brush be replaced. This rung shows why the valve sets the water use, then caps a scrub brush in aluminium, plumbs it and measures the water a grooming takes.
중급
About 4 hours

안내

1

Water per grooming

Jupyter 노트북 불러오는 중…
2

A horse brush before it

The embedded blueprint cleans the coat dry with rubber ridges. Danielson brings water to the bristles and lets it out nowhere else.
3

Read US 987,967

"A clamping wire 7 is placed around the cap and body within the groove in the cap presented by the said bead 6, and the ends of this clamping wire are formed into perforated lugs or ears 8 through which a securing bolt or screw 9 is inserted." "The brush is moved over the body of the horse and the water permitted to flow through the pipe to the interior of the cap, whence it will escape through the perforations in the body or back of the brush and escape through the bristles to the animal. The flow of water may be regulated according to the condition of the animal's skin so that mud or other matter may be quickly and easily removed and the horse quickly cleaned."
4

Perforate the back

Drill ten 4 mm holes through the scrub brush's back between the tufts, from the top.

이 단계의 재료:

솔(억센 털)솔(억센 털)1 개

필요한 도구:

바이스(만력)바이스(만력)
무선 드릴무선 드릴
드릴 비트 세트드릴 비트 세트
유성 매직유성 매직
투명 보안경투명 보안경
5

Groove the edge

Rout a 3 mm groove 3 mm deep round the back's edge, 8 mm above the bristle face.

필요한 도구:

루터루터
루터 비트 세트루터 비트 세트
투명 보안경투명 보안경
6

Shape the cap

Cut aluminium sheet to the back's outline plus 25 mm all round. Snip the margin into 15 mm tabs, fold them down over the sides, and press their edges into the groove. Seal the tab gaps with silicone.

이 단계의 재료:

알루미늄 판알루미늄 판1 개
실리콘 실런트실리콘 실런트1 개

필요한 도구:

판금 가위판금 가위
평집게평집게
망치망치
가죽 작업 장갑가죽 작업 장갑
7

Wire it on

Lay a strip of rubber sheet across the cap's joint. Lay galvanised wire in the groove over the tabs, bend its ends into eyes, and draw them together with an M4 screw and nut.

이 단계의 재료:

고무 시트고무 시트1 개
아연 도금 강선아연 도금 강선1 개
기계 나사기계 나사1 개
육각 너트육각 너트1 개

필요한 도구:

평집게평집게
드라이버 세트드라이버 세트
멍키스패너멍키스패너
8

Plumb the cap

Drill the cap's end for a threaded brass connector from the fittings. Clamp it with a flat washer, a rubber washer and a nut each side. Fit the ball valve and a hose connector to it.

이 단계의 재료:

황동 피팅황동 피팅1 개
평와셔평와셔1 개
고무 시트고무 시트1 개
볼 밸브볼 밸브1 개
PTFE 나사 밀봉 테이프PTFE 나사 밀봉 테이프1 개

필요한 도구:

무선 드릴무선 드릴
드릴 비트 세트드릴 비트 세트
멍키스패너멍키스패너
9

The build in 3D

FreeCAD model of this build, not of the patent: a 190 × 90 × 24 mm elliptical back with ten 4 mm holes and a groove, the cap and clamping wire, and the connector, valve and hose tail.
디자인 파일BLENDCC0 - Free
10

Test it

Connect the garden hose. Set the valve to fill the jug in one minute and note the litres; look for water anywhere but the bristles. Time how long it takes to loosen the wire and lift the cap off.
단계 10 - Image 1

이 단계의 재료:

정원용 호스정원용 호스1 개
물물1 개

필요한 도구:

계량 저그계량 저그
스톱워치스톱워치
11

A brush that leaks, floods or will not come apart

Capped fountain horse brush troubleshooting.

Flow

Loading...
12

History and honest limits

**Howard R. Danielson** of Crookston, Minnesota, filed US 987,967 on 26 March 1910; it was patented 28 March 1911. The back is preferably a wooden block of elliptical outline; the cap preferably a single piece of steel. A slit lets the cap spring over the back, sealed by a rubber block behind it. Inside, a clamping band riveted to the cap supports the pipe's inner end. He wrote that its life "is practically limitless, as the wear will all be on the bristles." **Honest limits.** Our tabbed aluminium cap needs silicone where his pressed steel cap did not, and a bought scrub brush stands in for his. Your water use is the result.

재료

13

필요 도구

15

디자인 파일

1

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...