예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Guarded Orange Knife: A Guard That Sets the Cut to the Peel, a Nut-Pick at the Other End
Peeling an orange with a knife cuts into the fruit and lets the juice run, and prising the peel off takes the fingernails.
Harry M. Hamrick of Philadelphia received US 461,914, dated 27 October 1891, for "a simple implement especially designed for cutting the peel of oranges, and adapted, also, for use as a nut-pick, and also to the removal of the peel from oranges after the same has been cut": a handle with a blade at one end, preferably with two cutting edges, beside a convex shield that regulates the depth of the cut to the thickness of the peel, and at the other end a pick curved at its outer end to go between the cut peel and the fruit, or to pick nuts.
This rung works out the peel's share and the depth to set, then files the blade and guard, fits a pick at the other end, and peels oranges and picks walnuts.
중급
About 3 hours
안내
1
1
The peel's depth
The peel's depth
Jupyter 노트북 불러오는 중…
2
2
The nut-pick before it
The nut-pick before it
The embedded blueprint makes a one-piece nut pick. Hamrick puts a curved pick on the end of an orange knife, for the peel or for nuts.
3
3
Read US 461,914
Read US 461,914
"The object of my invention is the production of a simple implement especially designed for cutting the peel of oranges, and adapted, also, for use as a nut-pick, and also to the removal of the peel from oranges after the same has been cut; and the invention consists, essentially, in providing a blade which preferably should have two cutting-edges with a shield or guard, so as to regulate the depth of the cut"
"The nut-pick or peel-remover, as will be seen from the drawings, is preferably curved at its outer end, as it can thus be more easily inserted between the cut sections of the peel of the orange when used for that purpose, while at the same time it is thus better adapted for use as a nut-pick."
4
4
Make the knife and peel an orange
Make the knife and peel an orange
**Handle.** Turn or rasp a 12 cm hardwood handle and drill both ends.
**Guard.** File a small disc of stainless steel sheet with a convex outer face, drill it in the middle, and fit it on one end of the handle as B.
**Blade.** Cut a short blade from stainless steel sheet, sharpen both edges and the point, and set it through the guard into the handle so its tip stands about 5 mm past the guard's face.
**Pick.** File a 5 mm stainless rod to a point, curve its last centimetre, and set it in the other end.
**Test.** Score an orange's peel in six segments, the guard riding on the peel, and lift the sections off with the pick. Check whether any cut reached the fruit. Crack walnuts and pick out their meat.
이 단계의 재료:
자루용 활엽수 각재1 개
스테인리스강 판1 개
연강 환봉0.1 미터
2액형 에폭시1 개
오렌지2 개
호두4 개필요한 도구:
거친 줄
무선 드릴
드릴 비트 세트
판금 가위
줄 (손줄)
숫돌
바이스(만력)
둥근 코 펜치
디지털 캘리퍼스 6인치
가죽 작업 장갑5
5
A knife that cuts too deep, too shallow or slips
A knife that cuts too deep, too shallow or slips
Guarded orange knife troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Harry M. Hamrick** of Philadelphia, Pennsylvania, filed US 461,914 on 9 March 1891; it is dated 27 October 1891. His drawing shows the handle A, the guard B convex on its outer face, the knife C and the nut-pick and peel-remover D. His claims cover the handle, guard, knife and pick combined, and the handle, knife and guard.
**Honest limits.** A hand-filed stainless blade and pick in a hardwood handle stand in for his made implement. The notebook treats the orange as a sphere with even peel; its values are examples. Your peeled oranges are the result.
재료
6- 1 개플레이스홀더
- 1 개플레이스홀더
- 0.1 미터플레이스홀더
- 1 개플레이스홀더
- 2 개플레이스홀더
- 4 개플레이스홀더
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.