예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Pressure-Fed Fountain Paint Brush: Air Pushes the Paint, a Finger Stops It
Emma

작성자

Emma

6. 10월 2026SE
21
0
0
0
0

The Pressure-Fed Fountain Paint Brush: Air Pushes the Paint, a Finger Stops It

Painting from a pot means stopping every few strokes to reload the brush. Gottfried Meyer and Charles G. Braun of Philadelphia received US 821,879, patented 29 May 1906, for a fountain paint brush: a reservoir pressurised through an air pipe with a check valve sends paint along a hose to a tube in a recess of the brush head and out through a flattened flexible web among the bristles; a spring holds a plunger open, and the forefinger pushes its knob to cut the paint off. This rung works out how paint thickness and pressure set the flow, then builds the tank from a bottle and a tyre valve, feeds a brush, and measures the flow.
중급
About 3 hours

안내

1

Flow through the hose

Jupyter 노트북 불러오는 중…
2

A one-way valve before it

The embedded blueprint lets flow pass one way only. Meyer and Braun put one on the air pipe so the pumped air stays in the paint tank.
3

Read US 821,879

"The knob 35 is disposed in convenient position for the fore or index finger of the hand which holds the brush, and the valve or plunger 33 can thus be easily maintained in its closed or inward position and the supply of paint cut off when not required." "The air-pressure causes the paint to flow to the brush no matter in what position the latter may be held and the flow is under complete control of the operator, as above noted."
4

Fit the cap

Drill a 1.5 L PET bottle's cap for a tyre valve and for vinyl tubing. Seat the valve, and push the tubing through until it touches the bottom. Seal both with epoxy.

이 단계의 재료:

PET 병 (탄산음료)PET 병 (탄산음료)1 개
타이어 밸브타이어 밸브1 개
투명 비닐 튜브투명 비닐 튜브1 개
2액형 에폭시2액형 에폭시1 개

필요한 도구:

무선 드릴무선 드릴
드릴 비트 세트드릴 비트 세트
공예용 칼공예용 칼
5

Feed the brush

Drill a 6 mm hole down through the stock of a 70 mm brush from the set, beside the handle. Push silicone tubing through it into the bristles and flatten its last 30 mm with a cable tie.

이 단계의 재료:

붓 세트붓 세트1 개
실리콘 튜브실리콘 튜브1 개
케이블 타이케이블 타이1 개

필요한 도구:

바이스(만력)바이스(만력)
무선 드릴무선 드릴
드릴 비트 세트드릴 비트 세트
6

Make the finger valve

Screw a hardwood block to the handle over the tubing. Fit an M5 screw through it with a spring under the head, so the screw rests off the tube and a press of the forefinger pinches it shut.

이 단계의 재료:

단단한 나무 목심단단한 나무 목심1 개
기계 나사기계 나사1 개
압축 스프링 세트압축 스프링 세트1 개

필요한 도구:

쇠톱(핵소)쇠톱(핵소)
무선 드릴무선 드릴
드릴 비트 세트드릴 비트 세트
드라이버 세트드라이버 세트
7

Join and pressurise

Join the bottle's tubing to the brush's with a 1.5 m length. Half fill the bottle with acrylic paint thinned with water, cap it, and pump to 0.2 bar on the gauge.

이 단계의 재료:

아크릴 물감 세트아크릴 물감 세트1 개
물물1 개

필요한 도구:

자전거 펌프자전거 펌프
압력계압력계
8

The patent drawing

US 821,879 drawing sheet, public domain (expired patent).
단계 8 - Image 1
9

Measure the flow

Hold the brush over the measuring cylinder for 30 s and read the paint. Repeat at 0.4 bar, with the brush upside down, and with the button pressed.
단계 9 - Image 1

필요한 도구:

메스실린더메스실린더
스톱워치스톱워치
압력계압력계
10

A brush that floods, starves or will not stop

Pressure-fed fountain paint brush troubleshooting.

Flow

Loading...
11

History and honest limits

**Gottfried Meyer** and **Charles G. Braun** of Philadelphia filed US 821,879 on 22 November 1905; it was patented 29 May 1906. Their reservoir has a valve casing with a detachable plug valve; a pipe reaches the bottom with lateral apertures; a sheet-metal band closes the recess in the brush head; all parts detach for cleaning when the colour is changed. **Honest limits.** A pinch on silicone tubing stands in for their plunger in a tube, and a PET bottle at low pressure for their reservoir. The notebook treats paint as a simple liquid. Your flows are the result.

재료

12

필요 도구

10

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...