예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Shears-Cup Lemon Squeezer: Two Cups on Crossed Handles, a Slotted Recess for the Juice
TheChef

작성자

TheChef

30. 9월 2026DK
33
0
0
0
0

The Shears-Cup Lemon Squeezer: Two Cups on Crossed Handles, a Slotted Recess for the Juice

A lemon squeezer lets the seeds through with the juice, or crushes them into it, and its holes clog with pulp. Thomas Reece and Arthur Clarke of Philadelphia, Pennsylvania, received US 61,251, dated 15 January 1867, for a squeezer of two cups of metal or wood on handles "pivoted together at x, so that the cups may be separated or brought together similar to the blades of a pair of shears." The larger cup has a small recess in its bottom with slots radiating from its centre, so formed "as not to allow any seed to pass through them", and the smaller cup has a flange that stops it going too far into the other. This rung works out the squeeze through the crossed handles, with a work check, then makes the squeezer from two tins on flat-bar handles, and squeezes lemons with it.
중급
About 4 hours

안내

1

Crossed handles

Jupyter 노트북 불러오는 중…
2

A hinged squeezer before it

The embedded blueprint pins its handles at their front ends. Reece and Clarke cross theirs like shears and slot the recess so seeds stay behind.
3

Read US 61,251

"The cup B is made smaller than cup A, and works within it with its bottom down. This cup B is provided around its mouth with a flange, d, which catches upon the mouth of cup A when the two cups are brought together, as shown in Figure 1. These cups are provided with the handles C and D, which said handles are pivoted together at x, so that the cups may be separated or brought together similar to the blades of a pair of shears." "The space between the two cups allows the juice to be pressed out through the slots or openings without breaking the seed, and the slots are so formed and are of such a size as not to allow any seed to pass through them."
4

Make the squeezer and press lemons

**Handles.** Cut two 25 cm lengths of 20 × 5 mm mild steel flat bar and drill each 8 cm from one end for an M6 pivot bolt, so they cross like shears. **Cups.** Cut the bottoms from two clean tin cans, one about 8 cm across and one about 6.5 cm, each 3 cm deep. In the larger one's base, hammer a small recess over a hole in a hardwood block, and cut four narrow slots in it radiating from the centre, 2 mm wide. Rivet a ring of tinplate round the smaller one's mouth as the flange d. **Assemble.** Rivet each cup to the short end of a handle so the smaller cup, bottom down, closes into the larger one when the handles are squeezed, and bolt the handles at the pivot. **Test.** Halve a lemon, put one half cut side down in the larger cup over a glass, and squeeze. Count the seeds left in the cup and in the glass, and weigh the juice.

이 단계의 재료:

연강 평강연강 평강0.5 미터
양철통양철통2 개
양철판양철판1 개
블라인드 리벳블라인드 리벳8 개
육각 볼트 모음육각 볼트 모음1 개
육각 너트육각 너트1 개
경목 블록경목 블록1 개
레몬레몬2 개

필요한 도구:

쇠톱(핵소)쇠톱(핵소)
무선 드릴무선 드릴
드릴 비트 세트드릴 비트 세트
줄 (손줄)줄 (손줄)
정밀 줄(니들 파일) 세트정밀 줄(니들 파일) 세트
바이스(만력)바이스(만력)
판금 가위판금 가위
망치망치
블라인드 리벳 건 키트블라인드 리벳 건 키트
멍키스패너멍키스패너
부엌칼부엌칼
디지털 주방 저울디지털 주방 저울
음료용 유리컵음료용 유리컵
가죽 작업 장갑가죽 작업 장갑
5

A squeezer that lets seeds through, clogs or sprays

Shears-cup lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**Thomas Reece and Arthur Clarke** of Philadelphia, Pennsylvania, received US 61,251, dated 15 January 1867. The cups could be metal, galvanized, or wood tinned against the acid; the peculiar shape of cup A with its recess kept the squeezer from clogging or choking. Their claim is the two hinged handles with the two cups, one with a slotted recess and the other with a flange. **Honest limits.** Tin cans and flat bar stand in for their made-up cups and handles. The notebook ignores friction; its forces and lengths are examples. Your seed count and juice are the result.

재료

8
  • 0.5 미터
    플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 2 개
    플레이스홀더

필요 도구

14

이 블루프린트로 만드는 것

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...