예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Street Letter Box: A Lid That Is Also an Air-Lock
Martin

작성자

Martin

27. 9월 2026NO
34
0
0
0
0

The Street Letter Box: A Lid That Is Also an Air-Lock

A letter box on the street must take letters in without letting rain in, and without letting anyone fish the letters back out through the slot. Philip B. Downing of Boston filed US 462,093 on 2 April 1891; it is dated 27 October 1891. His hinged lid carries arms with a pivoted safety plate. Raising the lid draws the plate over a fulcrum rod so it swings level: it cuts off the box and, with a fixed transverse plate, makes a shelf for the letter. Dropping the lid lets the plate fall and deliver the mail into the box. A rib stops a hook being worked in past the plate, and a hinged weather-strip over a storm-rib keeps rain and snow out of the hinge. This rung works out the box's capacity and the lid's self-closing, and builds a cardboard model of the lid mechanism.
초급
About 2 hours

안내

1

Capacity and the self-closing lid

Jupyter 노트북 불러오는 중…
2

What goes into the box

Machine-folded envelopes made mass letter post possible. The embedded blueprint shows the machine.
3

Read US 462,093

Downing's improvement is to "the lid or that portion through which mail-matter is introduced into the box", shown on "the upper part of a street letter-box." The cover A is hinged to ears a and normally closes the mailing-slot B. Arms D on the cover carry a safety-plate C, pivoted at d, which hangs vertically in the box when the cover is shut. For it to swing "when the cover A is raised from its vertical position" to "close the entrance into the box proper", an abutment or fulcrum E, a rod across the box, is provided: raising the cover draws the plate over it, and the plate takes an approximately horizontal position "and at the same time to cut off communication with the body of the box through the mailing-slot." A transverse plate F between the arms forms, with the guard plate, "a table or shelf upon which mail-matter will be received". "As soon as the cover is dropped the guard plate, being no longer held upward by its abutment or fulcrum, drops and delivers the mail into the box proper." A rib H under the slot prevents "the insertion of a wire or other hook" past plate F, and a hinged "weather-strip" G resting over a storm-rib g keeps "rain or snow" out of the hinge joint.
4

The lid's two doors, step by step

Blockly 작업 공간

Loading Blockly workspace...

5

Build the lid in card

Make a box from corrugated card with a slot near the top of its front. Cut a lid hinged above the slot with tape, and two arc-shaped card arms fixed to the lid that pass in through the ends of the slot. Pin a card guard plate to the arms, and push a dowel across the box as the fulcrum. Adjust the dowel's position until the plate swings level as the lid is raised and drops cleanly as it closes. Post folded paper letters and check that, with the lid raised, you cannot reach the letters already inside with a bent wire.

이 단계의 재료:

골판지 시트골판지 시트1 개
단단한 나무 목심단단한 나무 목심1 개
종이종이1 개
마스킹 테이프마스킹 테이프1 개
우체통우체통1 개

필요한 도구:

공예용 칼공예용 칼
자가 복원 커팅 매트자가 복원 커팅 매트
자자
글루건글루건
6

A letter box that misbehaves

Letter box troubleshooting.

Flow

Loading...
7

History and honest limits

**Philip B. Downing** of Boston filed US 462,093 on 2 April 1891; it is dated 27 October 1891. Its claims cover the hinged cover with arms carrying a pivoted guard-plate that rides on a fulcrum, the transverse plate, and the weather-strip. Note: US 462,096, often given for this invention, is a different patent (a carving machine). **Honest limits.** The box size, letter size, packing and lid weight in the notebook are examples.

재료

5

필요 도구

4
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더
  • 플레이스홀더

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...