예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
The Two-Fulcrum Nut Cracker: A Pick Kept in the Handle
One cracker cannot suit both a small pecan and a big walnut, and the pick that goes with it is always lost on the table.
Herbert Story of Kearney, New Jersey, received US 417,951, dated 24 December 1889, for a combined nut cracker and picker "useful and convenient" and "neat in appearance and at a small cost": the jaws pivot on a variable fulcrum with one place for small nuts and one for larger nuts, and one handle is a tube in which the nut pick is kept, screwed in, until it is wanted. He wrote plainly: "I do not claim, broadly, a combined nut cracker and picker, as such implements, are not new".
This rung works out squeeze and handle spread for two fulcrum holes, then builds the cracker from flat bar with a brass-tube handle and cracks pecans and walnuts in each hole.
중급
About 3 hours
안내
1
1
Squeeze and handle spread
Squeeze and handle spread
Jupyter 노트북 불러오는 중…
2
2
A pivot that does the work
A pivot that does the work
The embedded blueprint builds pivoted tongs with a spring by the pivot. Story's cracker gives the pivot two places to go.
3
3
Read US 417,951
Read US 417,951
"In said drawings, a a represent the two jaws of a nut-cracker with handles a′ a′, and pivoted at a² to a variable fulcrum b, one portion of said fulcrum b′ being arranged for small nuts and the other portion b² for larger nuts."
"When the nut-cracker only is to be employed, the nut-pick is allowed to remain in the handle, secured by the screw f, where it is out of the way and in no manner interferes with the use of the cracker".
4
4
Build the cracker and crack both sizes
Build the cracker and crack both sizes
**Bars.** Cut two 20 cm lengths of 20 × 5 mm mild steel flat bar. File a shallow V across the inside face of each near one end: the jaws. Clamp the two bars together and drill two 6.5 mm holes through both, 20 mm and 35 mm from the middle of the jaws.
**Pick handle.** Cut 12 cm of 3/8" brass tube and epoxy it along the outside of one handle, open at the end, as the socket for a nut pick. Let it cure.
**Pivot.** Bolt the bars through the near hole with an M6 bolt and two nuts locked against each other.
**Test.** Crack five pecans and five walnuts; measure the handle spread at the crack with the ruler. Move the bolt to the far hole and do the same. Compare with the notebook and with your own grip. Keep the nut pick in the tube between uses.
이 단계의 재료:
연강 평강0.4 미터
육각 볼트 모음1 개
육각 너트2 개
바깥지름 9.5 mm 황동관0.12 미터
에폭시 수지5 ml
호두10 개
피칸10 개필요한 도구:
쇠톱(핵소)
바이스(만력)
줄 (손줄)
무선 드릴
드릴 비트 세트
멍키스패너
자
디지털 캘리퍼스 6인치
견과류 꼬챙이
투명 보안경5
5
A cracker that will not open wide enough or slips
A cracker that will not open wide enough or slips
Two-fulcrum nut cracker troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Herbert Story** of Kearney, Hudson County, New Jersey, signed US 417,951 on 15 September 1888, filed it on 12 November 1888, and received it dated 24 December 1889. His solid handle carried a projection to match the socket on the other, "thus giving to the handle a uniform finish", and the pick screwed into the tubular handle.
**Honest limits.** Two drilled holes stand in for Story's fulcrum piece, and a push-fit brass tube for his threaded socket. The notebook assumes handles and jaws close together; its squeeze, lengths and nut sizes are examples. Your spreads and cracks are the result.
재료
7- 0.4 미터플레이스홀더
- 1 개플레이스홀더
- 2 개플레이스홀더
- 0.12 미터플레이스홀더
- 5 ml플레이스홀더
- 10 개플레이스홀더
- 10 개플레이스홀더
이 블루프린트로 만드는 것
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.