예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Two-Shaft Treadle Loom with a Split-Cane Reed
Woody

작성자

Woody

14. 10월 2026NO
3
0
0
0
0

Two-Shaft Treadle Loom with a Split-Cane Reed

On a treadle loom the feet open the shed, leaving both hands for the shuttle. A wooden frame carries the warp beam and the cloth beam; two shafts carry the heddles that lift alternate warp threads; treadles tied to the shafts work them; a batten with a reed, once made of split cane, spaces the warp and beats the weft in. The picture: a peasant handloom from Romania, old engraving.
고급
Two weeks

안내

1

Frame

Saw two side frames of beech, each two posts joined top and bottom by mortised rails, and join them with cross rails front and back. Glue and peg every joint square.

이 단계의 재료:

너도밤나무 제재목너도밤나무 제재목6 개
단단한 나무 목심단단한 나무 목심16 개
아교아교100 g

필요한 도구:

손톱(핸드소)손톱(핸드소)
등대기톱등대기톱
끌 세트끌 세트
나무 망치나무 망치
손 드릴손 드릴
직각자직각자
이중 냄비(중탕 냄비)이중 냄비(중탕 냄비)
2

Beams and ratchets

Shave two round beams from shafts for the warp beam at the back and the cloth beam at the front, with round journals resting in notches in the side frames. Cut a toothed wooden ratchet wheel on one end of each and a pawl on the frame to hold the tension.

이 단계의 재료:

곧은 나무 막대곧은 나무 막대2 개
너도밤나무 제재목너도밤나무 제재목1 개

필요한 도구:

당김칼(드로나이프)당김칼(드로나이프)
양손 대패양손 대패
손톱(핸드소)손톱(핸드소)
끌 세트끌 세트
3

Shafts and heddles

Make two shafts, each a pair of light bars. Tie cotton string heddles between the bars, each with a small eye in the middle, all the same length (step 6). Hang both shafts from cords over a roller on top of the frame, so one rises as the other sinks.

이 단계의 재료:

곧은 나무 막대곧은 나무 막대5 개
무명실무명실200 m
노끈·밧줄노끈·밧줄6 미터

필요한 도구:

슬로이드 조각칼슬로이드 조각칼
가위가위
자자
4

Reed and batten

Shave split cane into thin, even dents. Bind them upright between two pairs of wooden ribs with cotton thread wound between each dent, spacing them evenly. Mount the reed in a batten hung from the top of the frame so it swings to beat.

이 단계의 재료:

쪼갠 대나무쪼갠 대나무30 m
무명실무명실100 m
너도밤나무 제재목너도밤나무 제재목1 개

필요한 도구:

슬로이드 조각칼슬로이드 조각칼
손톱(핸드소)손톱(핸드소)
손 드릴손 드릴
5

Treadles

Hinge two treadle bars to a rod at the back of the floor frame. Tie each to the bottom of one shaft, so pressing a treadle pulls its shaft down and lifts the other.

이 단계의 재료:

너도밤나무 제재목너도밤나무 제재목1 개
곧은 나무 막대곧은 나무 막대1 개
노끈·밧줄노끈·밧줄4 미터

필요한 도구:

손톱(핸드소)손톱(핸드소)
손 드릴손 드릴
슬로이드 조각칼슬로이드 조각칼
6

Reed and heddles

Jupyter 노트북 불러오는 중…

재료

7

필요 도구

12

이 블루프린트로 만드는 것

CC0 퍼블릭 도메인

이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.

제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.

토론

(0)

로그인 하여 토론에 참여하세요

댓글 로딩 중...