කලාව
රූපලාවණ්ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්රතිලෝම ඉංජිනේරු
විද්යාවන්
ක්රීඩා
තාක්ෂණය
පැළඳිය හැකි

Black Card Stock: Pasteboard Coated with Lampblack
Black card shows up a pale deposit that would vanish on white card. Lampblack, the soot of oil lamps, is a deep black pigment because it reflects almost no light. Grind it into a thin warm glue size, brush two even coats on pasteboard, and press the cards flat as they dry.
The picture: our diagram, the same pale deposit on white card and on black card.
ආරම්භක
A day, mostly drying
උපදෙස්
1
1
Make the size
Make the size
Soak a little hide glue in water, then warm it in the double boiler until it is a thin liquid.
මෙම පියවර සඳහා ද්රව්ය:
සත්ත්ව සම් ඇලවුම20 ග්රෑ
ජලය0.4 ලීටර්අවශ්ය මෙවලම්:
ද්විත්ව භාජන උයන බඳුන
තුලාව2
2
Grind in the black
Grind in the black
Grind the lampblack in the mortar with a little of the warm size until smooth, then stir in the rest.
මෙම පියවර සඳහා ද්රව්ය:
ලාම්පු දුම් කළු30 ග්රෑඅවශ්ය මෙවලම්:
වංගෙඩිය හා මෝල් ගස3
3
Coat the board
Coat the board
Brush an even coat over each sheet of pasteboard in one direction, then a second coat across it once the first is dry.
මෙම පියවර සඳහා ද්රව්ය:
ඇලවූ කඩදාසි පුවරුව20 කැබලිඅවශ්ය මෙවලම්:
පළල් තීන්ත බුරුසුව
වියළන රාක්කය4
4
Press flat
Press flat
When nearly dry, stack the cards between clean sheets under a flat stone overnight so they do not curl.
අවශ්ය මෙවලම්:
පැතලි ගල් පුවරුව5
5
Paint needed
Paint needed
Jupyter සටහන් පොත පූරණය වෙමින්…
ද්රව්ය
4- 20 ග්රෑස්ථානගත
- 0.4 ලීටර්ස්ථානගත
- 30 ග්රෑස්ථානගත
- 20 කැබලිස්ථානගත
අවශ්ය මෙවලම්
6- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
මෙම සැලසුම සාදන්නේ
සම්බන්ධ බ්ලූප්රින්ට්
මෙම බ්ලූප්රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්රම, ද්රව්ය හෝ මූලධර්ම
CC0 පොදු වසම
මෙම බ්ලූප්රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.
බ්ලූප්රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

