සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)
Forge

නිර්මාතෘ

Forge

4. නොවැම්බර් 2026NO
4
0
0
0
0

Brazing Torch: a Pressure-Tank Gasoline or Kerosene Torch (Shop Notes, 1909)

A shop brazing and tempering torch: a wall-hung pipe tank of gasoline or kerosene pumped up with a bicycle pump, feeding a 1/8 in pipe whose end is coiled round a short 1 in pipe; the flame heats the coil, the oil turns to gas, and it blasts out through a pinhole cap. Two burners on a tee give a bigger heat. Source: Popular Mechanics Shop Notes for 1909, pp. 861-862. Picture: the article's drawing.
මධ්‍යම
Unknown

උපදෙස්

1

Make the tank

Cap both ends of a 2 in pipe 20 in long. Drill three holes in the top cap: one for the rubber tube from a bicycle pump, one for a steam gauge, and one with a screw plug for filling with fuel oil.

මෙම පියවර සඳහා ද්‍රව්‍ය:

වානේ නළය (ඝන බිත්ති, නූල් කැපූ කෙළවර)වානේ නළය (ඝන බිත්ති, නූල් කැපූ කෙළවර)1 2 in x 20 in
නූල් කැපූ නළ සවිකිරීමනූල් කැපූ නළ සවිකිරීම3 two caps, plug
පීඩන මානයපීඩන මානය1 කැබැල්ල
රබර් නලයරබර් නලය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

අත් විදුමඅත් විදුම
ඉස්කුරුප්පු කැපීමේ කට්ටලයඉස්කුරුප්පු කැපීමේ කට්ටලය
නළ කරාමයනළ කරාමය
බයිසිකල් බිම් පොම්පයබයිසිකල් බිම් පොම්පය
2

Coil the burner

Drill the bottom cap and connect a 1/8 in pipe D, any length, with a globe valve in it to set and shut off the oil. Fill the last 10 in of the pipe with lead, coil it round a 1 in pipe F 6 in long, and turn the end out to take two elbows and a short nipple; then melt the lead out. Drill a small hole in the centre of a 1/8 in cap and fit it on the end (E) so the hole lines up with the centre of pipe F.

මෙම පියවර සඳහා ද්‍රව්‍ය:

වානේ නළය (ඝන බිත්ති, නූල් කැපූ කෙළවර)වානේ නළය (ඝන බිත්ති, නූල් කැපූ කෙළවර)1 1/8 in, and 1 in x 6 in
නූල් කැපූ නළ සවිකිරීමනූල් කැපූ නළ සවිකිරීම4 two elbows, nipple, 1/8 in cap
ගෝල කපාටයගෝල කපාටය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

ඊයම්ඊයම්
සිදුරු සහිත හැන්දසිදුරු සහිත හැන්ද
කම්මල් උදුනකම්මල් උදුන
අත් විදුමඅත් විදුම
නළ කරාමයනළ කරාමය
3

Start the burner

Hang a little cup holding three or four teaspoonfuls of oil just below the coil and light it to heat the coil; then pump up the tank and open the globe valve. For more heat connect two burners on a tee so their blasts meet.

අවශ්‍ය මෙවලම්:

භූමිතෙල්භූමිතෙල්
බයිසිකල් බිම් පොම්පයබයිසිකල් බිම් පොම්පය

ද්‍රව්‍ය

5

අවශ්‍ය මෙවලම්

8

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...