සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Cold Trap: Liquid-Air Well round the Line, in an Evacuated Jacket (Smith, US 2,513,114)
Charlie

නිර්මාතෘ

Charlie

9. නොවැම්බර් 2026DE
0
0
0
0
0

Cold Trap: Liquid-Air Well round the Line, in an Evacuated Jacket (Smith, US 2,513,114)

A cold trap freezes water and other vapours out of a vacuum line before they reach a gauge or a pump. D. W. Smith (US 2,513,114, filed 1944) blows it as one glass piece: the inlet tube runs down through an annular well of liquid air, and an outer jacket round the well opens into the outlet tube, so the pump keeps the jacket evacuated and it insulates the liquid air. Only a small ring of liquid air is open to the room, so little boils away and the trap stays cold for long periods. Source: D. W. Smith, "Liquid Air Trap", US Patent 2,513,114 (1950). Picture: its Figs. 1-2.
උසස්
Unknown

උපදෙස්

1

Read Smith

"My invention consists in providing a cold trap integral with a tubular conduit and designed to surround the conduit with a cylindrical pool of liquid air; a double-walled, evacuated chamber being provided to insulate the liquid air from the atmosphere."
2

Blow the trap

Make one glass piece (Fig. 1): an inlet tube running down through the middle; round it an annular well, open at the top, whose inner side is the inlet tube and outer side an inner wall; round the well a closed outer jacket coaxial with it, joined to the well at the top. Below, the inlet tube ends open inside the jacket, and the jacket narrows into the outlet tube (the jacket and the line share one vacuum). Smith says glass may be used and the material is not critical; no sizes, glass or blowing method are given (ours: a glassblowing torch and an annealing oven).

මෙම පියවර සඳහා ද්‍රව්‍ය:

වීදුරු නළයවීදුරු නළය1 kind not given
නොදන්නා වීදුරුනොදන්නා වීදුරු1 කැබැල්ල

අවශ්‍ය මෙවලම්:

මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
ලෝහ මෘදු කිරීමේ උඳුනලෝහ මෘදු කිරීමේ උඳුන
නොදන්නා හැඩගැන්වීමේ ක්‍රමයනොදන්නා හැඩගැන්වීමේ ක්‍රමය
නොදන්නා මිනුම්නොදන්නා මිනුම්
3

Put it in the line

Join the inlet tube to the side to be protected (Smith: the ion gauge) and the outlet tube to the vacuum pump. Pumping the line also evacuates the jacket, which then insulates the well.

අවශ්‍ය මෙවලම්:

රික්ත පොම්පයරික්ත පොම්පය
4

Fill and use

Fill the well with liquid air. Water, mercury and other vapours freeze onto the walls of the inlet tube inside the well and stay there. Only the small ring at the top of the well is open to the room, so the liquid air lasts a long time without topping up.

අවශ්‍ය මෙවලම්:

ද්‍රව වාතයද්‍රව වාතය

ද්‍රව්‍ය

2

අවශ්‍ය මෙවලම්

6

මෙම සැලසුම සාදන්නේ

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...