කලාව
රූපලාවණ්ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්රතිලෝම ඉංජිනේරු
විද්යාවන්
ක්රීඩා
තාක්ෂණය
පැළඳිය හැකි

Counter-Rotating Egg Beater: One Wheel, Two Beaters Turning Opposite Ways
A single whisk carries the egg round with it rather than cutting through it.
James F. Monroe of Fitchburg, Massachusetts, and E. P. Monroe of New York received US 23,694, dated 19 April 1859, for an egg beater: a frame clamped to a table carries a bevel wheel turned by a handle, gearing into two pinions on opposite sides of it; one turns an inner beater of bent wires, the other an outer beater round it, "in opposite directions."
This rung works out the beater speeds, then prints the crown wheel and pinions, bends the beaters, and times a beating.
මධ්යම
About 5 hours, plus printing
උපදෙස්
1
1
Beater speeds
Beater speeds
Jupyter සටහන් පොත පූරණය වෙමින්…
2
2
The gear train it uses
The gear train it uses
The embedded blueprint works gear ratios and direction. Monroe takes two pinions off opposite sides of one wheel so they turn opposite ways.
3
3
Read US 23,694
Read US 23,694
"This invention consists in arranging in an adjustable frame two beaters, one inside the other, which receive motion in opposite directions by means of two pinions which gear into a large bevel wheel and on opposite sides of the same, so that by rotating the bevel wheel by means of a handle the beaters receive the required motion."
4
4
Print the gears
Print the gears
Print the 48-tooth crown wheel (/uploads/blueprints/counter-rotating-egg-beater-crown-wheel.stl) and two 12-tooth pinions (/uploads/blueprints/counter-rotating-egg-beater-pinion.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
මෙම පියවර සඳහා ද්රව්ය:
PETG තන්තු1 කැබැල්ලඅවශ්ය මෙවලම්:
FDM 3D මුද්රණ යන්ත්රය5
5
Build the frame
Build the frame
Cut a plywood upright and two arms. Bolt the crown wheel to the upright on an M5 screw with washers so it turns freely, and fix a handle screw near its rim. Drill the arms 5 mm on the line through both pinions' centres.
මෙම පියවර සඳහා ද්රව්ය:
ප්ලයිවුඩ් තහඩුව1 කැබැල්ල
යන්ත්ර ඉස්කුරුප්පු1 කැබැල්ල
පැතලි වොෂරය1 කැබැල්ල
ෂඩාස්ර ඇණ බෝල්තුව1 කැබැල්ල
ලී ඉස්කුරුප්පුව #8 × අඟල් 11 කැබැල්ලඅවශ්ය මෙවලම්:
වක්ර කපන කියත
රැහැන් රහිත සිදුරු යන්ත්රය
සිදුරු කරන තුඩු කට්ටලය
සීරුම් රැන්ච්
ඉස්කුරුප්පු නියන කට්ටලය6
6
Arbor and inner beater
Arbor and inner beater
Cut 200 mm of 5 mm rod. Epoxy one pinion on it to mesh at the wheel's top, and bend two wire loops 28 mm across at its lower end.
මෙම පියවර සඳහා ද්රව්ය:
මෘදු වානේ වටකුරු දණ්ඩ1 කැබැල්ල
මල නොබැඳෙන වානේ කම්බිය1 කැබැල්ල
කොටස් දෙකේ එපොක්සි1 කැබැල්ලඅවශ්ය මෙවලම්:
යකඩ කපන කියත
වටකුරු තුඩු අඬුව
පැතලි කට සන්නස7
7
Sleeve and outer beater
Sleeve and outer beater
Glue the second pinion to a length of silicone tube sleeved loosely over the rod, meshing at the wheel's bottom. Bend two wire loops 48 mm across and fix them to the sleeve's lower end, round the inner beater.
මෙම පියවර සඳහා ද්රව්ය:
මල නොබැඳෙන වානේ කම්බිය1 කැබැල්ල
කොටස් දෙකේ එපොක්සි1 කැබැල්ලඅවශ්ය මෙවලම්:
වටකුරු තුඩු අඬුව
පැතලි කට සන්නස
ඩිජිටල් කැලිපරය අඟල් 68
8
The patent drawing
The patent drawing
US 23,694 drawing sheet, public domain (expired patent).

9
9
Beat egg whites
Beat egg whites
Clamp the frame to the table over the bowl with two egg whites. Turn the handle about once a second and time how long until they hold stiff peaks.

මෙම පියවර සඳහා ද්රව්ය:
බිත්තරය2 කැබලිඅවශ්ය මෙවලම්:
මල නොබැඳෙන වානේ විශාල මිශ්ර කිරීමේ බඳුන
නැවතුම් ඔරලෝසුව10
10
Beaters that turn together, jam or clash
Beaters that turn together, jam or clash
Counter-rotating egg beater troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**James F. Monroe** of Fitchburg, Massachusetts, and **E. P. Monroe** of New York, assignors to E. P. Monroe, received US 23,694, dated 19 April 1859, reissued 16 October 1860 (No. 1,062). The frame's fork clamps to a table with a set screw and washer. The second pinion lies loose on the arbor, driving the outer beater whose lower collar turns loosely round the arbor's end. They noted it also mixes paint.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A crown wheel and spur pinions stand in for his bevel gears, and a silicone sleeve for his loose pinion. Your times are the result.
ද්රව්ය
11- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 2 කැබලිස්ථානගත
- 2 කැබලිස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 2 කැබලිස්ථානගත
අවශ්ය මෙවලම්
12- ස්ථානගත
- ස්ථානගත
- 1 vendor sell this, none ship to you yetස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
මෙම සැලසුම සාදන්නේ
සම්බන්ධ බ්ලූප්රින්ට්
මෙම බ්ලූප්රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්රම, ද්රව්ය හෝ මූලධර්ම
CC0 පොදු වසම
මෙම බ්ලූප්රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.
බ්ලූප්රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.



