සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Extruded Polystyrene Foam: Propylene-Blown Log Let Out at 40 °C (McIntire, Dow 1948, Ex. 3, Test 1)
Charlie

නිර්මාතෘ

Charlie

28. ඔක්තෝබර් 2026DE
9
0
0
0
0

Extruded Polystyrene Foam: Propylene-Blown Log Let Out at 40 °C (McIntire, Dow 1948, Ex. 3, Test 1)

Extruded polystyrene foam blown with a propylene gas fraction instead of methyl chloride. Polystyrene stands two days at 40 °C with the propylene under pressure and becomes a gel. Let out at 40 °C (200 psi in the tower), it swelled into a log 8 inches across, weighing 7.7 lb per cubic foot, with coarse but uniform cells. Source: O. R. McIntire (Dow), US 2,450,436 (1948), Example 3. Picture: the patent's drawing.
උසස්
3 days

උපදෙස්

1

Charge the tower with polystyrene

Charge a high-pressure tower with 300 lb of granular polystyrene.

මෙම පියවර සඳහා ද්‍රව්‍ය:

පොලිස්ටයිරීන්පොලිස්ටයිරීන්300 රාත්තල්

අවශ්‍ය මෙවලම්:

පීඩන ප්‍රතික්‍රියාකාරකයපීඩන ප්‍රතික්‍රියාකාරකය
තුලාවතුලාව
රබර් අත්වැසුම්රබර් අත්වැසුම්
2

Add the propylene fraction

Add 100 lb of a cracked-oil gas fraction that is about 93 % propylene, under pressure, and close the tower. Propylene is a flammable gas: no flames, strong ventilation.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ප්‍රොපිලීන්ප්‍රොපිලීන්100 රාත්තල්

අවශ්‍ය මෙවලම්:

පීඩන වායු සිලින්ඩරයපීඩන වායු සිලින්ඩරය
පීඩන ප්‍රතික්‍රියාකාරකයපීඩන ප්‍රතික්‍රියාකාරකය
රසායනික ඉසීම් කණ්ණාඩියරසායනික ඉසීම් කණ්ණාඩිය
3

Stand two days at 40 °C

Let the tower stand for two days at 40 °C while the polystyrene takes up the propylene.

අවශ්‍ය මෙවලම්:

පීඩන ප්‍රතික්‍රියාකාරකයපීඩන ප්‍රතික්‍රියාකාරකය
රසායනාගාර උෂ්ණත්වමානයරසායනාගාර උෂ්ණත්වමානය
4

Let it out at 40 °C

Open the valved outlet near the bottom (3.25 inch in the patent) at 40 °C. The pressure is about 200 psi. The gel flows out and swells into a log 8 inches across, 7.7 lb per cubic foot, with coarse but uniform cells. Close the outlet again.

අවශ්‍ය මෙවලම්:

පීඩන ප්‍රතික්‍රියාකාරකයපීඩන ප්‍රතික්‍රියාකාරකය
රසායනාගාර උෂ්ණත්වමානයරසායනාගාර උෂ්ණත්වමානය
රසායනික ඉසීම් කණ්ණාඩියරසායනික ඉසීම් කණ්ණාඩිය
රබර් අත්වැසුම්රබර් අත්වැසුම්
5

Saw into boards

When the foam has set, saw it lengthwise into slabs (ours: a woodworking saw).

අවශ්‍ය මෙවලම්:

වඩු කියතවඩු කියත
රබර් අත්වැසුම්රබර් අත්වැසුම්

ද්‍රව්‍ය

2

අවශ්‍ය මෙවලම්

7

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...