සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Ferrite Toroid Core: Copper-Zinc Ferrite Milled 200 Hours, Fired at 1050 °C (Snoek)
Charlie

නිර්මාතෘ

Charlie

21. ඔක්තෝබර් 2026DE
12
0
0
0
0

Ferrite Toroid Core: Copper-Zinc Ferrite Milled 200 Hours, Fired at 1050 °C (Snoek)

Ferrite is a ceramic magnet: iron oxide combined with other metal oxides, carrying magnetic flux while hardly conducting electricity. In his first ferrite patent (US 2,452,529, 1948) Snoek at Philips ground the oxides very fine and fired rings in oxygen. This copper-zinc ferrite is milled about 200 hours, fired 2 hours at 1050 °C and held 12 hours at 600 °C; his core had an initial permeability of 200. The picture: our diagram.
උසස්
2 weeks

උපදෙස්

1

Mix 20 : 30 : 50 mol

Mix pure copper oxide, zinc oxide and ferric oxide, 20 : 30 : 50 mol %. Ours, by weight: 13.24 g copper oxide, 20.32 g zinc oxide and 66.44 g ferric oxide per 100 g.

මෙම පියවර සඳහා ද්‍රව්‍ය:

තඹ ඔක්සයිඩ්තඹ ඔක්සයිඩ්13.24 ග්‍රෑ
සින්ක් ඔක්සයිඩ් කුඩුසින්ක් ඔක්සයිඩ් කුඩු20.32 ග්‍රෑ
ෆෙරික් ඔක්සයිඩ්ෆෙරික් ඔක්සයිඩ්66.44 ග්‍රෑ

අවශ්‍ය මෙවලම්:

තුලාවතුලාව
දූවිලි වෙස් මුහුණදූවිලි වෙස් මුහුණ
2

Grind about 200 hours in an iron ball mill

Grind the mixture for about 200 hours in an iron ball mill.

අවශ්‍ය මෙවලම්:

යකඩ බෝල් මිලයකඩ බෝල් මිල
දූවිලි වෙස් මුහුණදූවිලි වෙස් මුහුණ
3

Mould a ring at 4 tons per cm²

Press the powder at 4 tons per square centimetre into a ring 3 cm across with a 4 × 4 mm section.

අවශ්‍ය මෙවලම්:

හයිඩ්‍රොලික් මුද්‍රණ යන්ත්‍රයහයිඩ්‍රොලික් මුද්‍රණ යන්ත්‍රය
වළල්ල තද කිරීමේ අච්චුවවළල්ල තද කිරීමේ අච්චුව
4

Fire 2 hours at 1050 °C, hold 12 hours at 600 °C

Heat the ring for two hours at 1050 °C in a current of oxygen, cool at 5 °C a minute to 600 °C, hold it there 12 hours, then cool to room temperature, all in oxygen. Snoek's core: initial permeability 200.

අවශ්‍ය මෙවලම්:

නළ උදුනනළ උදුන
ඔක්සිජන්ඔක්සිජන්
පීඩන වායු සිලින්ඩරයපීඩන වායු සිලින්ඩරය
පයිරෝමීටරයපයිරෝමීටරය
කෝප්ප අඬුවකෝප්ප අඬුව
තාපයට ඔරොත්තු දෙන අත්වැසුම්තාපයට ඔරොත්තු දෙන අත්වැසුම්

ද්‍රව්‍ය

3

අවශ්‍ය මෙවලම්

11

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...