කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Fine Silver Wire Drawn Through a Drawplate
Forge

නිර්මාතෘ

Forge

14. ඔක්තෝබර් 2026NO
2
0
0
0
0

Fine Silver Wire Drawn Through a Drawplate

Silver is one of the most ductile metals and draws easily into wire. Forge fine silver into a rod, taper the end, and pull it through the holes of a drawplate one size at a time, lubricated with beeswax and annealed as it stiffens. The volume stays the same, so the wire grows longer as it gets thinner. The picture: a drawplate in the vise, beeswax, and silver wire in a pan.
මධ්‍යම
Half a day

උපදෙස්

1

Make a rod

Hammer the fine silver into a round rod a little larger than the plate's largest hole, heating it to a dull red and quenching whenever it stiffens.

මෙම පියවර සඳහා ද්‍රව්‍ය:

පිරිසිදු රිදීපිරිසිදු රිදී30 ග්‍රෑ
ජලයජලය5 ලීටර්

අවශ්‍ය මෙවලම්:

නියන (ඇන්විලය)නියන (ඇන්විලය)
හරස් කුඤ්ඤ හිසක් සහිත මිටියහරස් කුඤ්ඤ හිසක් සහිත මිටිය
ප්‍රොපේන් පන්දමප්‍රොපේන් පන්දම
කම්මල්කරුගේ අඬුවකම්මල්කරුගේ අඬුව
නිවීමේ බාල්දියනිවීමේ බාල්දිය
2

Taper the end

File the first 2 cm to a long taper so it pokes through the hole.

අවශ්‍ය මෙවලම්:

කටු කට්ටලයකටු කට්ටලය
බංකු තද කරන්නාබංකු තද කරන්නා
3

Set up the plate

Clamp the drawplate in the vise, tapered side of the holes toward you, and rub beeswax on the rod.

මෙම පියවර සඳහා ද්‍රව්‍ය:

මී ඉටිමී ඉටි5 ග්‍රෑ

අවශ්‍ය මෙවලම්:

වානේ කම්බි ඇදීමේ තැටියවානේ කම්බි ඇදීමේ තැටිය
බංකු තද කරන්නාබංකු තද කරන්නා
4

Draw

Push the taper through the first hole it will not slip through, grip it with the draw tongs and pull it through in one steady pull, straight out from the plate.

අවශ්‍ය මෙවලම්:

ඇදීමේ අඬුඇදීමේ අඬු
වානේ කම්බි ඇදීමේ තැටියවානේ කම්බි ඇදීමේ තැටිය
සම් වැඩ අත්වැසුම්සම් වැඩ අත්වැසුම්
5

Next holes, and anneal

Draw through each smaller hole in turn. When it gets stiff, coil it, anneal it to a dull red on a fire brick and quench.

අවශ්‍ය මෙවලම්:

ප්‍රොපේන් පන්දමප්‍රොපේන් පන්දම
ගිනි ඉටිකැටයගිනි ඉටිකැටය
නිවීමේ බාල්දියනිවීමේ බාල්දිය
6

Measure and coil

Stop at the size you need, measured with the caliper. Anneal it once more for soft wire and coil it.

අවශ්‍ය මෙවලම්:

ඩිජිටල් කැලිපරය අඟල් 6ඩිජිටල් කැලිපරය අඟල් 6
7

Length from the rod

Jupyter සටහන් පොත පූරණය වෙමින්…

ද්‍රව්‍ය

3
  • ස්ථානගත
  • 5 ලීටර්
    ස්ථානගත
  • 5 ග්‍රෑ
    ස්ථානගත

අවශ්‍ය මෙවලම්

12

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...