කලාව
රූපලාවණ්ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්රතිලෝම ඉංජිනේරු
විද්යාවන්
ක්රීඩා
තාක්ෂණය
පැළඳිය හැකි

Machete to a Relief Specification
Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
උසස්
Factory process
උපදෙස්
1
1
Forge the blade
Forge the blade
Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.
මෙම පියවර සඳහා ද්රව්ය:
කාබන් වානේ දණ්ඩ (0.6 % C)1 කැබැල්ලඅවශ්ය මෙවලම්:
කම්මල් උදුන
පතන මිටිය2
2
Harden and temper
Harden and temper
Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.
අවශ්ය මෙවලම්:
කම්මල් උදුන
රොක්වෙල් දැඩියාව පරීක්ෂකය3
3
Fit the handle
Fit the handle
Fit the wooden handle into the grooves and fix it with three steel rivets and washers.
මෙම පියවර සඳහා ද්රව්ය:
මිටි සඳහා දෘඪ දැව කොටස1 කැබැල්ල
වානේ රිවට්3 කැබලි
වානේ වොෂර්3 කැබලි4
4
Check
Check
Check the edge for dents and the hardness near the edge.
අවශ්ය මෙවලම්:
රොක්වෙල් දැඩියාව පරීක්ෂකයද්රව්ය
4- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 3 කැබලිස්ථානගත
- 3 කැබලිස්ථානගත
මෙම සැලසුම සාදන්නේ
සම්බන්ධ බ්ලූප්රින්ට්
මෙම බ්ලූප්රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්රම, ද්රව්ය හෝ මූලධර්ම
CC0 පොදු වසම
මෙම බ්ලූප්රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.
බ්ලූප්රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.


