කලාව
රූපලාවණ්ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්රතිලෝම ඉංජිනේරු
විද්යාවන්
ක්රීඩා
තාක්ෂණය
පැළඳිය හැකි

Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork
A vial is a small glass tube closed at one end, usually with a flat bottom where a test tube has a round one. A lip vial is closed with a cork. Work wide glass tubing in the flame as for test tubes, flatten the closed end on the marver, turn out a lip and fit a cork.
The picture: a small old glass vial with its cork.
මධ්යම
An afternoon
උපදෙස්
1
1
Draw off and close
Draw off and close
Heat the tubing in the flame while turning it until it softens through, then pull the ends apart to close it, as for test tubes. Melt the closed end until the glass gathers evenly.
මෙම පියවර සඳහා ද්රව්ය:
වීදුරු නල කට්ටලය1 කැබැල්ලඅවශ්ය මෙවලම්:
බන්සන් දාහකය
තාපයට ඔරොත්තු දෙන අත්වැසුම්
ආරක්ෂිත කණ්ණාඩි2
2
Flatten the bottom
Flatten the bottom
While the closed end is soft, press it straight down on the marver so it sets flat and the vial stands (our step).
අවශ්ය මෙවලම්:
බන්සන් දාහකය
මාවර් (වීදුරු පෙරළන තහඩුව)
තාපයට ඔරොත්තු දෙන අත්වැසුම්3
3
Cut and turn the lip
Cut and turn the lip
Score the tube at the vial's length with a file and snap it. Heat the open end and roll out a small lip so a cork seats firmly.
අවශ්ය මෙවලම්:
ලෝහ කටුව
බන්සන් දාහකය
ආරක්ෂිත කණ්ණාඩි4
4
Anneal and cork
Anneal and cork
Let the vial cool slowly in the edge of the flame, then trim a cork to fit the mouth.
මෙම පියවර සඳහා ද්රව්ය:
කෝක් ඇණ1 කැබැල්ලඅවශ්ය මෙවලම්:
බන්සන් දාහකය
උපයෝගී පිහිය
කෝක් සිදුරුකරුව5
5
Tube size for 50 ml
Tube size for 50 ml
Jupyter සටහන් පොත පූරණය වෙමින්…
මෙම සැලසුම සාදන්නේ
සම්බන්ධ බ්ලූප්රින්ට්
මෙම බ්ලූප්රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්රම, ද්රව්ය හෝ මූලධර්ම
CC0 පොදු වසම
මෙම බ්ලූප්රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.
බ්ලූප්රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

