කලාව
රූපලාවණ්ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්රතිලෝම ඉංජිනේරු
විද්යාවන්
ක්රීඩා
තාක්ෂණය
පැළඳිය හැකි

Greensand Casting Sand
Green sand is moulding sand that is used damp: fine silica sand bound by a little clay and water, so it packs firm round a pattern, holds a sharp shape, and lets steam escape when hot metal is poured. 'Green' means unbaked, not the colour. Bentonite clay is the usual binder; the mix is tempered with water until a squeezed handful holds its shape and breaks cleanly.
ආරම්භක
1 hour
උපදෙස්
1
1
Sieve the sand
Sieve the sand
With a dust mask on, sieve dry fine quartz sand to remove stones and lumps.
මෙම පියවර සඳහා ද්රව්ය:
ක්වාර්ට්ස් වැලි20 කිග්රෑඅවශ්ය මෙවලම්:
සියුම් දැල් හලාව
දූවිලි වෙස් මුහුණ2
2
Add the clay
Add the clay
Weigh in bentonite at about a tenth of the sand's weight and mix it through dry in the trough until the colour is even.
මෙම පියවර සඳහා ද්රව්ය:
බෙන්ටනයිට් මැටි2 කිග්රෑඅවශ්ය මෙවලම්:
කිරුම් තුලාව
මිශ්ර කරන ද්රෝණිය
දූවිලි වෙස් මුහුණ3
3
Temper with water
Temper with water
Mist water over it a little at a time, rubbing the sand between your hands and through the sieve to spread the clay and water evenly.
මෙම පියවර සඳහා ද්රව්ය:
ජලය1 ලීටර්අවශ්ය මෙවලම්:
ජල ඉසින බෝතලය
සියුම් දැල් හලාව4
4
Squeeze test
Squeeze test
Squeeze a handful. It should hold the print of your fingers and break cleanly in two when bent, not crumble or stick to your hand. Add sand if sticky, water if crumbly.
5
5
Store damp
Store damp
Keep it covered in a lidded bucket so it stays damp; re-temper before each use.
අවශ්ය මෙවලම්:
වැසුමක් සහිත ලෝහ බාල්දියද්රව්ය
3- 20 කිග්රෑස්ථානගත
- 2 කිග්රෑස්ථානගත
- 1 ලීටර්ස්ථානගත
අවශ්ය මෙවලම්
6- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
මෙම සැලසුම සාදන්නේ
CC0 පොදු වසම
මෙම බ්ලූප්රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.
බ්ලූප්රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.
