කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Grindstone: Sandstone Wheel on a Cranked Axle with a Treadle
Woody

නිර්මාතෘ

Woody

14. ඔක්තෝබර් 2026NO
14
0
0
0
0

Grindstone: Sandstone Wheel on a Cranked Axle with a Treadle

A grindstone is a sandstone wheel spun on its axle to sharpen metal tools, used wet. Medieval ones were turned by a crank; by about 1480 a treadle was added so one person could pedal and grind. Shape the stone, wedge it on an iron axle with a crank, and mount it over a water trough in a wooden frame with a treadle. The picture: a treadle grindstone on an iron stand, from Cassell's Carpentry.
උසස්
Several days

උපදෙස්

1

Shape the stone

Scribe a circle on an even-grained sandstone slab, about 50 cm across and 7 cm thick (our size). Peck and chisel it round, then cut a square hole in the centre.

මෙම පියවර සඳහා ද්‍රව්‍ය:

වැලිගල් පුවරුවවැලිගල් පුවරුව1 කැබැල්ල

අවශ්‍ය මෙවලම්:

තුඩු දෙකේ මිනුම් කවකටුවතුඩු දෙකේ මිනුම් කවකටුව
පහරදෙන ගලපහරදෙන ගල
ගල් නිර්මාණ නියන් කට්ටලයගල් නිර්මාණ නියන් කට්ටලය
ගල් වඩුවාගේ ලී මිටියගල් වඩුවාගේ ලී මිටිය
ආරක්ෂිත කණ්ණාඩිආරක්ෂිත කණ්ණාඩි
දූවිලි වෙස් මුහුණදූවිලි වෙස් මුහුණ
2

Forge the axle and crank

Forge a square-sectioned axle to pass through the hole, round at both ends for the bearings, and bend a crank at one end with a hole for the treadle rod.

මෙම පියවර සඳහා ද්‍රව්‍ය:

තලන ලද යකඩ දණ්ඩතලන ලද යකඩ දණ්ඩ2 කැබලි
අඟුරුඅඟුරු4 as required

අවශ්‍ය මෙවලම්:

කම්මල් උදුනකම්මල් උදුන
නියන (ඇන්විලය)නියන (ඇන්විලය)
හරස් කුඤ්ඤ හිසක් සහිත මිටියහරස් කුඤ්ඤ හිසක් සහිත මිටිය
කම්මල්කරුගේ අඬුවකම්මල්කරුගේ අඬුව
3

Wedge and true the stone

Centre the stone on the axle and drive hardwood wedges round the square part from both sides until it runs without wobble. Turn it and dress the rim true against a fixed iron.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දැඩි දැව තීරුවදැඩි දැව තීරුව1 කැබැල්ල

අවශ්‍ය මෙවලම්:

ගල් වඩුවාගේ ලී මිටියගල් වඩුවාගේ ලී මිටිය
ගල් නිර්මාණ නියන් කට්ටලයගල් නිර්මාණ නියන් කට්ටලය
4

Frame, trough and treadle

Build an oak frame with notched bearings for the axle, a plank trough below the stone to hold water, and a treadle hinged at the back joined to the crank by a rod.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දැඩි දැව ඝන පලංචියදැඩි දැව ඝන පලංචිය3 කැබලි
යකඩ ඇණයකඩ ඇණ30 කැබලි

අවශ්‍ය මෙවලම්:

අත් කියතඅත් කියත
කුහර නියනකුහර නියන
අත් විදුමඅත් විදුම
හරස් කුඤ්ඤ හිසක් සහිත මිටියහරස් කුඤ්ඤ හිසක් සහිත මිටිය
5

Surface speed

Jupyter සටහන් පොත පූරණය වෙමින්…

ද්‍රව්‍ය

6

අවශ්‍ය මෙවලම්

13

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...