සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Inked Fabric Printer Ribbon: Tricresyl Phosphate, Castor Oil and Carbon Black Ink (Neidich, Underwood, US 2,139,092)
Charlie

නිර්මාතෘ

Charlie

31. ඔක්තෝබර් 2026DE
5
0
0
0
0

Inked Fabric Printer Ribbon: Tricresyl Phosphate, Castor Oil and Carbon Black Ink (Neidich, Underwood, US 2,139,092)

Ribbon inks made with plain oils went thin in warm weather and rancid with age, so the ribbon printed unevenly and soon dried out. Neidich replaced half the oil with tricresyl phosphate, which keeps the ink at an even thickness and does not oxidise. Result: a fabric ribbon saturated with a non-drying black ink for typewriters and printers. Source: Neidich, US 2,139,092 (Underwood Elliott Fisher, 1938). Not given: which fibre the ribbon is woven from (he says only an absorbent fabric), how the ink is put on. Picture drawn by Youblob.
මධ්‍යම
2 hours

උපදෙස්

1

Weigh the ink

Parts by weight: tricresyl phosphate 50, castor oil 50, carbon black 20, Prussian blue toning base 20. Neidich allows some variation.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ට්‍රයික්‍රෙසයිල් පොස්පේට්ට්‍රයික්‍රෙසයිල් පොස්පේට්50 parts
එඬරු තෙල් (සීතලෙන් මිරිකූ, හෙක්සේන් රහිත)එඬරු තෙල් (සීතලෙන් මිරිකූ, හෙක්සේන් රහිත)50 parts
කාබන් කළු කුඩුකාබන් කළු කුඩු20 parts
ප්‍රෂියානු නිල්ප්‍රෂියානු නිල්20 parts

අවශ්‍ය මෙවලම්:

ඇඹරුම් මෝලයඇඹරුම් මෝලය
2

Grind the pigments into the oils

Grind the carbon black and Prussian blue with the tricresyl phosphate and castor oil in a mill until the colour is spread evenly through the ink.

අවශ්‍ය මෙවලම්:

ඇඹරුම් මෝලයඇඹරුම් මෝලය
3

Take an absorbent ribbon fabric

Use a woven ribbon of absorbent fabric. Neidich does not say which fibre or width.

මෙම පියවර සඳහා ද්‍රව්‍ය:

තීන්ත නොගැල්වූ රිබන් රෙද්දතීන්ත නොගැල්වූ රිබන් රෙද්ද1 as required

අවශ්‍ය මෙවලම්:

කතුරකතුර
4

Saturate the ribbon

Saturate the ribbon with the ink. Neidich says only that it is applied as usual. Ours: run it through the ink and squeeze it between rollers so it is evenly wet, not dripping.

අවශ්‍ය මෙවලම්:

ගිල්වා ආලේපන රෝලර් යුගලයගිල්වා ආලේපන රෝලර් යුගලය

ද්‍රව්‍ය

5

අවශ්‍ය මෙවලම්

3

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...