සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Lazy Susan: a Cross-Grained Top on Rollers and a Centre Pivot
Woody

නිර්මාතෘ

Woody

18. ඔක්තෝබර් 2026NO
21
0
0
0
0

Lazy Susan: a Cross-Grained Top on Rollers and a Centre Pivot

A lazy Susan is a turntable set on a table so dishes can be passed round. In Howell's self-waiting table of 1891 the turning top is made of two thicknesses of wood glued with the grain crossed, mounted on a central pivot and running on rollers. This free-standing version puts the rollers and pivot on a base disc; the sizes are ours. The picture: Howell's patent drawing, US 464,073.
මධ්‍යම
1 day

උපදෙස්

1

Make the top

Glue two 10 mm hardwood boards face to face with their grain crossed and clamp them overnight. Mark a 400 mm circle with the compass, cut it out with the jigsaw and plane and sand the edge.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දෘඪ දැව පුවරුවදෘඪ දැව පුවරුව2 කැබලි
දැව ඇලවුමදැව ඇලවුම30 මිලි

අවශ්‍ය මෙවලම්:

දණ්ඩ කලම්පයදණ්ඩ කලම්පය
මාලිමාවමාලිමාව
ජිග්සෝ කියතජිග්සෝ කියත
අත් ලීයන යන්ත්‍රයඅත් ලීයන යන්ත්‍රය
සඳපත් කට්ටලයසඳපත් කට්ටලය
2

Make the base

Cut a 300 mm base disc from 18 mm hardwood and bore a hole at its centre for the pivot dowel.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දෘඪ දැව පුවරුවදෘඪ දැව පුවරුව1 කැබැල්ල

අවශ්‍ය මෙවලම්:

මාලිමාවමාලිමාව
ජිග්සෝ කියතජිග්සෝ කියත
ස්ථාවර සිදුරු යන්ත්‍රයස්ථාවර සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
3

Fit the rollers

Glue four small blocks on the base at equal spacing near its rim, each bored across for a steel pin. Mount a small wooden wheel on each pin, its axis pointing at the centre, so the top of every wheel stands just above the blocks.

මෙම පියවර සඳහා ද්‍රව්‍ය:

කුඩා ලී රෝදකුඩා ලී රෝද4 කැබලි
මෘදු වානේ වටකුරු දණ්ඩමෘදු වානේ වටකුරු දණ්ඩ200 mm
දෘඪ දැව පුවරුවදෘඪ දැව පුවරුව1 කැබැල්ල

අවශ්‍ය මෙවලම්:

යකඩ කපන කියතයකඩ කපන කියත
ස්ථාවර සිදුරු යන්ත්‍රයස්ථාවර සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
ආරක්ෂිත කණ්ණාඩිආරක්ෂිත කණ්ණාඩි
4

Set the pivot

Glue a hardwood dowel into a hole at the centre of the underside of the top. Lower the top so the dowel drops into the base and the top rests on the four rollers. It should turn at a light touch.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දෘඪ ලී කූරුදෘඪ ලී කූරු1 කැබැල්ල

අවශ්‍ය මෙවලම්:

ස්ථාවර සිදුරු යන්ත්‍රයස්ථාවර සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
5

Finish

Sand all surfaces and wipe on linseed oil.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ලිනිසීඩ් තෙල්ලිනිසීඩ් තෙල්30 මිලි

අවශ්‍ය මෙවලම්:

සඳපත් කට්ටලයසඳපත් කට්ටලය
කපු රෙදි කැබලිකපු රෙදි කැබලි

ද්‍රව්‍ය

6

අවශ්‍ය මෙවලම්

10

මෙම සැලසුම සාදන්නේ

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...