කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Leather Strips and Straps
Tex

නිර්මාතෘ

Tex

11. ඔක්තෝබර් 2026FO
36
0
0
0
0

Leather Strips and Straps

Belts, handles, laces and hinges start as strips cut from a side of firm vegetable-tanned leather. A strap cutter holds the width while you draw it along a straight edge; the edges are then bevelled, sanded and burnished smooth with a little gum and friction so they do not fray or fuzz. Firm leather about 3–4 mm thick suits straps; thinner leather suits laces and binding strips.
ආරම්භක
1 hour

උපදෙස්

1

The leather

How the firm, vegetable-tanned leather is made.
2

Cut a straight edge

Lay the leather grain side up on the cutting mat and cut one long straight edge along the straightedge, following the backbone line where the leather is most even.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ශාක මගින් පදම් කළ සමශාක මගින් පදම් කළ සම0.1 sqm

අවශ්‍ය මෙවලම්:

කෙළින් දාරයකෙළින් දාරය
උපයෝගී පිහියඋපයෝගී පිහිය
තමන්ම සුව වන කැපුම් පැදුරතමන්ම සුව වන කැපුම් පැදුර
ඩිජිටල් කැලිපරය අඟල් 6ඩිජිටල් කැලිපරය අඟල් 6
3

Pull the strips

Set the strap cutter to the width, run its fence against the straight edge and pull it along the leather in one steady draw. Repeat for each strip.

අවශ්‍ය මෙවලම්:

පටි කපන මෙවලමපටි කපන මෙවලම
මිනුම් පටියමිනුම් පටිය
4

Bevel the edges

Run the edge beveler along both corners of each edge, front and back.

අවශ්‍ය මෙවලම්:

සමේ දාර කපන මෙවලමසමේ දාර කපන මෙවලම
5

Sand and burnish

Sand the edges smooth, dampen them with a little gum tragacanth in water, and rub hard with the wooden slicker until they shine. A touch of beeswax finishes them.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ට්‍රැගකැන්ත් ගම (කිත්‍රේ)ට්‍රැගකැන්ත් ගම (කිත්‍රේ)5 ග්‍රෑ
ජලයජලය0.05 ලීටර්
මී ඉටිමී ඉටි5 ග්‍රෑ

අවශ්‍ය මෙවලම්:

සඳපත් කොළයසඳපත් කොළය
සමේ දාර ඔප දමන මෙවලමසමේ දාර ඔප දමන මෙවලම
6

Punch and finish

Cut the ends to shape and punch any holes the strap needs.

අවශ්‍ය මෙවලම්:

සම් සිදුරු කිරීමේ කට්ටලයසම් සිදුරු කිරීමේ කට්ටලය
උපයෝගී පිහියඋපයෝගී පිහිය
7

Troubleshooting

Strap cutting troubleshooting.

Flow

Loading...

ද්‍රව්‍ය

4

අවශ්‍ය මෙවලම්

10

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...