කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Lidded Storage Jar: a Coil-Built Pot with a Fitted Flanged Lid
Mary

නිර්මාතෘ

Mary

14. ඔක්තෝබර් 2026FI
11
0
0
0
0

Lidded Storage Jar: a Coil-Built Pot with a Fitted Flanged Lid

Fired clay does not rust, react with salts or let light through, which is why herbs, pigments and remedies were kept in clay jars. This is our coil pot with a straight neck and a lid that sits inside it on a flange, made from the same clay at the same time so both shrink alike. The picture: a lidded earthenware jar with a horn handle, Korea, Silla or Kaya period (Cleveland Museum of Art).
මධ්‍යම
A week with drying and firing

උපදෙස්

1

Wedge the clay

Wedge about 3 kg of clay body for the jar and its lid together, so both come from the same batch (the amount is ours, for a jar about 15 cm tall).

මෙම පියවර සඳහා ද්‍රව්‍ය:

කුඹල් මැටි කඳකුඹල් මැටි කඳ3 කිග්‍රෑ

අවශ්‍ය මෙවලම්:

මැටි කර්මාන්තය සඳහා කැන්වස් වැඩ පෘෂ්ඨයමැටි කර්මාන්තය සඳහා කැන්වස් වැඩ පෘෂ්ඨය
පිහියපිහිය
2

Build the jar

Build a coil pot as in the coil pot blueprint, but bring the neck up straight and finish the rim level all round, so a lid can sit on it.
3

Make the lid

While the jar is still soft, roll a disc a little wider than the mouth. Measure the inside of the neck and add a coil ring underneath the disc that just fits inside it: the flange that keeps the lid from sliding. Score, slip and join it, and add a knob on top.

මෙම පියවර සඳහා ද්‍රව්‍ය:

මැටි ද්‍රාවය (ද්‍රව මැටි)මැටි ද්‍රාවය (ද්‍රව මැටි)1 as required

අවශ්‍ය මෙවලම්:

මැටි කර්මාන්තය සඳහා කැන්වස් වැඩ පෘෂ්ඨයමැටි කර්මාන්තය සඳහා කැන්වස් වැඩ පෘෂ්ඨය
මැටි සීරීමේ මෙවලමමැටි සීරීමේ මෙවලම
මැටි කර්මාන්ත මෙවලම් කට්ටලයමැටි කර්මාන්ත මෙවලම් කට්ටලය
පිහියපිහිය
4

Fit at leather-hard

When jar and lid are both leather-hard, try the lid in place and pare the flange or rim until it seats without rocking. Smooth both with a damp sponge.

අවශ්‍ය මෙවලම්:

මැටි කර්මාන්ත මෙවලම් කට්ටලයමැටි කර්මාන්ත මෙවලම් කට්ටලය
මැටි වැඩ ස්පොන්ජ් කට්ටලයමැටි වැඩ ස්පොන්ජ් කට්ටලය
5

Dry and fire together

Dry them slowly to bone-dry, the lid off the jar, and fire them in the same pit firing as the coil pot, so they shrink alike.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දරදර1 as required

අවශ්‍ය මෙවලම්:

උදැල්ල (කර)උදැල්ල (කර)

ද්‍රව්‍ය

3

අවශ්‍ය මෙවලම්

6

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...