කලාව
රූපලාවණ්ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්රතිලෝම ඉංජිනේරු
විද්යාවන්
ක්රීඩා
තාක්ෂණය
පැළඳිය හැකි

Long Wooden Stirring Paddle from a Beech Board
A broad wooden blade on a long round handle, for stirring vats of dye, soap, mash or porridge. Saw the outline from a straight-grained beech board, thin the blade, round the handle and smooth it.
The picture: a home-made mash paddle in birch, its blade drilled with holes.
ආරම්භක
Half a day
උපදෙස්
1
1
Mark out
Mark out
Choose a straight-grained board about 2.5 cm thick. Mark a paddle as long as your vat is deep plus about 35 cm, with a blade about 10 cm wide and a handle about 4 cm wide.
මෙම පියවර සඳහා ද්රව්ය:
බීච් දැව1 කැබැල්ලඅවශ්ය මෙවලම්:
රූලක්2
2
Saw the outline
Saw the outline
Rip the handle cheeks with the hand saw and cut the curves where blade meets handle with the coping saw.
අවශ්ය මෙවලම්:
අත් කියත
වක්ර කපන කියත
බංකු තද කරන්නා3
3
Thin the blade
Thin the blade
On the shaving horse, take the blade down with the drawknife from the middle toward the edges, to about 1.2 cm at the edges.
අවශ්ය මෙවලම්:
සූරන බංකුව
අත් දෙකේ ඇදුම් පිහිය4
4
Round the handle
Round the handle
Take the corners off the handle with the drawknife, then round and smooth it with the spokeshave so it turns in the hand.
අවශ්ය මෙවලම්:
සූරන බංකුව
අත් දෙකේ ඇදුම් පිහිය
දෙඅත් ලී සූරනය5
5
Holes and finish
Holes and finish
Drill a few holes through the blade if you like, as in the picture. Rasp the edges round and sand everything smooth. Leave the wood bare.
අවශ්ය මෙවලම්:
අත් විදුම
ලී රාස්පය
වැලි කඩදාසි6
6
Length for the vat
Length for the vat
Jupyter සටහන් පොත පූරණය වෙමින්…
මෙම සැලසුම සාදන්නේ
සම්බන්ධ බ්ලූප්රින්ට්
මෙම බ්ලූප්රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්රම, ද්රව්ය හෝ මූලධර්ම
CC0 පොදු වසම
මෙම බ්ලූප්රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.
බ්ලූප්රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.


