කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Magnifying Glass from a Hand-Ground Lens
Penny

නිර්මාතෘ

Penny

11. ඔක්තෝබර් 2026DK
35
0
0
0
0

Magnifying Glass from a Hand-Ground Lens

A magnifying glass is a convex lens in a frame with a handle. A typical one has a focal length of 25 cm, an optical power of 4 dioptres, and is sold as "2×": its magnifying power is 0.25 m × 4 + 1 = 2 for an eye whose near point is 25 cm. Here the lens is ground plano-convex from crown glass (refractive index about 1.52). For a plano-convex lens the focal length is R / (n − 1), so a 25 cm focal length needs a curve of radius about 13 cm. The lens is then set in a turned wooden ring with a handle; those sizes are ours.
උසස්
2–3 days

උපදෙස්

1

Grind the lens

Following the lens-grinding blueprint, grind one face of a glass disc to a spherical curve of about 13 cm radius, working down through the grits, then polish it clear with cerium oxide on a pitch lap. Leave the other face flat.

මෙම පියවර සඳහා ද්‍රව්‍ය:

වීදුරු තහඩුවවීදුරු තහඩුව1 කැබැල්ල
සිලිකන් කාබයිඩ් දැල්ලසිලිකන් කාබයිඩ් දැල්ල200 ග්‍රෑ
සීරියම් ඔක්සයිඩ් ඔප දැමීමේ කුඩුසීරියම් ඔක්සයිඩ් ඔප දැමීමේ කුඩු50 ග්‍රෑ
පයින් තාර ඇලවුමපයින් තාර ඇලවුම100 ග්‍රෑ

අවශ්‍ය මෙවලම්:

රූලක්රූලක්
2

Check the focus

Hold the lens in sunlight and move a card behind it until the spot is smallest; the distance from lens to card is the focal length and should be close to 25 cm. Do not look at the Sun through it.

අවශ්‍ය මෙවලම්:

රූලක්රූලක්
3

Turn the frame

Turn a ring from a hardwood blank with a groove on the inside just wider than the lens edge, and part it off.

මෙම පියවර සඳහා ද්‍රව්‍ය:

බඳුන් හැඩ ගැන්වීමේ මේපල් ලී කොටයබඳුන් හැඩ ගැන්වීමේ මේපල් ලී කොටය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

ලී කරකැවීමේ යන්ත්‍රයලී කරකැවීමේ යන්ත්‍රය
වක්‍ර නියනවක්‍ර නියන
කපා වෙන් කරන උල්ල (ලේත් යන්ත්‍රය)කපා වෙන් කරන උල්ල (ලේත් යන්ත්‍රය)
4

Turn the handle

Turn a handle from a hardwood dowel and fix it into a hole drilled in the ring.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දෘඪ ලී කූරුදෘඪ ලී කූරු1 කැබැල්ල
කොටස් දෙකේ එපොක්සිකොටස් දෙකේ එපොක්සි5 මිලි

අවශ්‍ය මෙවලම්:

ලී කරකැවීමේ යන්ත්‍රයලී කරකැවීමේ යන්ත්‍රය
5

Set the lens

Saw the ring through at the handle, spring the lens into the groove, glue the cut closed and wax the wood.

මෙම පියවර සඳහා ද්‍රව්‍ය:

මී ඉටිමී ඉටි10 ග්‍රෑ

ද්‍රව්‍ය

8

අවශ්‍ය මෙවලම්

4

මෙම සැලසුම සාදන්නේ

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...