සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Pendulum Bob: a Lead Sphere Cast with Its Eye at the Top Centre
Forge

නිර්මාතෘ

Forge

18. ඔක්තෝබර් 2026NO
21
0
0
0
0

Pendulum Bob: a Lead Sphere Cast with Its Eye at the Top Centre

A long pendulum needs a heavy, symmetrical bob: Foucault's of 1851 was a 28 kg brass-coated lead bob on a 67 m wire. This one is a solid lead sphere 12 cm across, about 10 kg, cast in sand with an eye bolt set in its exact top centre so the wire hangs through its axis. Size and method are ours. The picture: our drawing.
මධ්‍යම
1 day

උපදෙස්

1

Turn the pattern

Turn a hardwood ball 12 cm across on the lathe, checking it with the caliper in several directions, and saw it in half through its centre for a split pattern.

අවශ්‍ය මෙවලම්:

දැඩි දැව කුට්ටියදැඩි දැව කුට්ටිය
ලී කරකැවීමේ යන්ත්‍රයලී කරකැවීමේ යන්ත්‍රය
ඩිජිටල් කැලිපරය අඟල් 6ඩිජිටල් කැලිපරය අඟල් 6
යකඩ කපන කියතයකඩ කපන කියත
2

Ram the mould

Ram one half in each part of the flask, draw them, and cut a sprue into the cavity to one side of the top. Set the eye bolt upside down in the sand of the top so its threaded shank hangs into the cavity exactly on the sphere's axis.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ඇස් සහිත බෝල්ට්ඇස් සහිත බෝල්ට්1 කැබැල්ල

අවශ්‍ය මෙවලම්:

වාත්තු වැලිවාත්තු වැලි
වාත්තු පෙට්ටියවාත්තු පෙට්ටිය
අත් ට්‍රොවලයඅත් ට්‍රොවලය
3

Melt and pour

Melt about 11 kg of lead in an iron pot on the forge. Skim it and pour into the sprue in one go until the sprue stands full. Let it cool in the sand.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ඊයම් වාත්තු කැටයඊයම් වාත්තු කැටය11 කිග්‍රෑ

අවශ්‍ය මෙවලම්:

වාත්තු යකඩ දිය කිරීමේ බඳුනවාත්තු යකඩ දිය කිරීමේ බඳුන
කම්මල් උදුනකම්මල් උදුන
කෝප්ප අඬුවකෝප්ප අඬුව
ඩිජිටල් මුළුතැන්ගෙයි තරාදියඩිජිටල් මුළුතැන්ගෙයි තරාදිය
වෑල්ඩින් අත්වැසුම්වෑල්ඩින් අත්වැසුම්
සම් ඇප්‍රොනයසම් ඇප්‍රොනය
මුහුණු පලිහමුහුණු පලිහ
4

Trim and check

Shake it out, saw off the sprue and file the seam. Hang it by the eye: it must hang still with the eye straight above the centre. Weigh it.

අවශ්‍ය මෙවලම්:

යකඩ කපන කියතයකඩ කපන කියත
කටු කට්ටලයකටු කට්ටලය
ඩිජිටල් මුළුතැන්ගෙයි තරාදියඩිජිටල් මුළුතැන්ගෙයි තරාදිය
වෑල්ඩින් අත්වැසුම්වෑල්ඩින් අත්වැසුම්

ද්‍රව්‍ය

2

අවශ්‍ය මෙවලම්

15

මෙම සැලසුම සාදන්නේ

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...