කලාව
රූපලාවණ්ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්රතිලෝම ඉංජිනේරු
විද්යාවන්
ක්රීඩා
තාක්ෂණය
පැළඳිය හැකි

Propane Hand Torch: Goss, 1949
John C. Goss of Pittsburgh patented this hand torch, US 2,465,643, in March 1949. It burns propane, which turns from liquid to gas so readily that, shut in a tank, it makes its own working pressure: unlike the older blow torch, it needs no pump. The knurled cylindrical tank is also the handle. A dispersion tube hangs from the tank top to about half the tank's height and draws gas, not liquid, through a minute port in its end cap. A needle valve meters the gas to a nozzle bent back at about thirty degrees to the tank. A spring-loaded ball check valve lets the tank be filled from a supply bottle but lets nothing out.
උසස්
Workshop process
උපදෙස්
1
1
Tank
Tank
Make an elongated, gas-tight cylindrical metal tank with a bottom and a top. Knurl rows of bands round the outside: the tank is also the handle.
මෙම පියවර සඳහා ද්රව්ය:
රැළි කළ පන්දම් ඉන්ධන ටැංකිය1 කැබැල්ලඅවශ්ය මෙවලම්:
ලෝහ කරකැවුම් යන්ත්රය
නර්ලිං මෙවලම2
2
Top with bosses
Top with bosses
Form the tank top with a valve boss and a nozzle boss integral with it. The valve boss holds a chamber divided by a valve seat; a channel joins the chamber above the seat to the bore of the nozzle boss.
මෙම පියවර සඳහා ද්රව්ය:
කපාට සහ තුණ්ඩ පාදම් සහිත පන්දම් ටැංකි මුදුන1 කැබැල්ල3
3
Dispersion tube
Dispersion tube
Fix a dispersion tube in the top, near the centre, reaching down to about half the tank's height. Its upper end opens into the valve chamber below the seat; its lower end carries a fixed cap with a minute inlet port.
මෙම පියවර සඳහා ද්රව්ය:
ඇතුළුම් වැස්මක් සහිත විසරණ නළය1 කැබැල්ල4
4
Valves and nozzle
Valves and nozzle
Screw the needle control valve into the valve boss through a packing gland and nut, and fit the adjusting cap. Fix the nozzle pipe on the nozzle boss with a crown nut, angled back about thirty degrees to the tank. Mount the spring-loaded ball check valve in its casing in the top and close it with the sealing plug.
මෙම පියවර සඳහා ද්රව්ය:
ඉඳිකටු පාලන කපාටය1 කැබැල්ල
පන්දම් තුණ්ඩය සහ තුණ්ඩ නළය1 කැබැල්ල
බෝල ප්රතිගාමී කපාටය1 කැබැල්ලඅවශ්ය මෙවලම්:
සීරුම් රැන්ච්5
5
Charge with propane
Charge with propane
Remove the sealing plug and connect the supply bottle: liquid propane flows in through the check valve. Fill to no more than half the tank. With the control valve open while charging, liquid spitting from the nozzle shows the level has reached the dispersion tube's end. Replace the plug.
මෙම පියවර සඳහා ද්රව්ය:
ප්රොපේන්1 as requiredඅවශ්ය මෙවලම්:
සීරුම් රැන්ච්ද්රව්ය
7- 1 කැබැල්ලස්ථානගත
- ස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 කැබැල්ලස්ථානගත
- 1 as requiredස්ථානගත
අවශ්ය මෙවලම්
3- ස්ථානගත
- ස්ථානගත
- ස්ථානගත
මෙම සැලසුම සාදන්නේ
සම්බන්ධ බ්ලූප්රින්ට්
මෙම බ්ලූප්රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්රම, ද්රව්ය හෝ මූලධර්ම
CC0 පොදු වසම
මෙම බ්ලූප්රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.
බ්ලූප්රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

