කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Rocking Twin-Dasher Lever Churn: One Lever Rocks the Box and Works Two Dashers Through a Perforated Wall
Millie

නිර්මාතෘ

Millie

7. ඔක්තෝබර් 2026NL
39
0
0
0
0

Rocking Twin-Dasher Lever Churn: One Lever Rocks the Box and Works Two Dashers Through a Perforated Wall

A. C. Stiles of South Bloomfield, Ohio, received US 3,764, dated 27 September 1844, for a rocking churn: an oblong box on rockers, split by a partition with holes, with a dasher on each side worked by arms on shafts across the ends, and one upright lever that rocks the box and works the dashers together. This rung prints the partition, dashers and arms, builds the box and makes butter.
උසස්
About 6 hours, plus printing

උපදෙස්

1

One lever, three motions

Jupyter සටහන් පොත පූරණය වෙමින්…
2

Two dashers from one lever, before it

Mitchell worked two dashers from one lever; Stiles adds rockers and a perforated partition between them.
3

Read US 3,764

"The machine is operated by moving the upright lever l, to and fro, which rocks the box, while at the same time it works the dashers up and down, thus throwing the cream through the partition d, till the butter is made."
4

Print the parts

Print the partition (/uploads/blueprints/rocking-twin-dasher-lever-churn-partition.stl), two dashers (/uploads/blueprints/rocking-twin-dasher-lever-churn-dasher.stl), two dasher arms (/uploads/blueprints/rocking-twin-dasher-lever-churn-dasher-arm.stl) and two lower arms (/uploads/blueprints/rocking-twin-dasher-lever-churn-lower-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

මෙම පියවර සඳහා ද්‍රව්‍ය:

PETG තන්තුPETG තන්තු1 කැබැල්ල

අවශ්‍ය මෙවලම්:

FDM 3D මුද්‍රණ යන්ත්‍රයFDM 3D මුද්‍රණ යන්ත්‍රය
5

Box on rockers

Build a pine box about 260 × 120 × 150 mm with a close-fitting lid, sealed inside. Glue the partition across its middle and screw two curved pine rockers lengthwise underneath. Drill the lid for the two dasher handles.

මෙම පියවර සඳහා ද්‍රව්‍ය:

පයින් ලෑල්ලපයින් ලෑල්ල1 කැබැල්ල
දැව ඇලවුමදැව ඇලවුම1 කැබැල්ල
සිලිකෝන් මුද්‍රාවසිලිකෝන් මුද්‍රාව1 කැබැල්ල
ලී ඉස්කුරුප්පුව #8 × අඟල් 1ලී ඉස්කුරුප්පුව #8 × අඟල් 11 කැබැල්ල

අවශ්‍ය මෙවලම්:

අත් කියතඅත් කියත
වක්‍ර කපන කියතවක්‍ර කපන කියත
රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
ක්ලැම්ප්ක්ලැම්ප්
6

Shafts, arms and lever

Set a 10 mm square shaft across each end on two studs, 60 mm above the lid. Fit a dasher arm on each, pointing inward and pinned to its dasher's handle, and a lower arm on each outside the box. Join the lower arms with a pine bar, and pivot an upright pine lever on a block near the box's foot, pinned to the bar's middle.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දෘඪ ලී කූරුදෘඪ ලී කූරු1 කැබැල්ල
පයින් ලෑල්ලපයින් ලෑල්ල1 කැබැල්ල
මෘදු වානේ වටකුරු දණ්ඩමෘදු වානේ වටකුරු දණ්ඩ1 කැබැල්ල
යන්ත්‍ර ඉස්කුරුප්පුයන්ත්‍ර ඉස්කුරුප්පු1 කැබැල්ල

අවශ්‍ය මෙවලම්:

අත් කියතඅත් කියත
රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
ඉස්කුරුප්පු නියන කට්ටලයඉස්කුරුප්පු නියන කට්ටලය
7

The patent drawing

US 3,764 drawing sheet, public domain (expired patent).
පියවර 7 - Image 1
8

Rock and churn

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Work the lever to and fro: the box rocks and the dashers rise and fall in turn. Keep fingers clear of the arms and the rockers. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ඝන ක්‍රීම්ඝන ක්‍රීම්1500 මිලි
රළු මුහුදු ලුණුරළු මුහුදු ලුණු1 කැබැල්ල
ජලයජලය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

ඇතුළේ තබන පරීක්ෂක තාපමානයඇතුළේ තබන පරීක්ෂක තාපමානය
නැවතුම් ඔරලෝසුවනැවතුම් ඔරලෝසුව
ඩිජිටල් මුළුතැන්ගෙයි තරාදියඩිජිටල් මුළුතැන්ගෙයි තරාදිය
මල නොබැඳෙන වානේ විශාල මිශ්‍ර කිරීමේ බඳුනමල නොබැඳෙන වානේ විශාල මිශ්‍ර කිරීමේ බඳුන
9

Troubleshooting

Rocking twin-dasher churn troubleshooting.

Flow

Loading...
10

History and honest limits

**A. C. Stiles** of South Bloomfield, Pickaway County, Ohio, US 3,764, 27 September 1844. He claimed the combination of the rockers and dashers in the double-chambered churn. His drawing gives no sizes; ours are ours. FDM prints hold food in their layer lines, so wash well and replace when worn.

ද්‍රව්‍ය

11

අවශ්‍ය මෙවලම්

11

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...