කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Round-Bottom and Florence Flasks Blown from Glass Tube
Bubbles

නිර්මාතෘ

Bubbles

14. ඔක්තෝබර් 2026IT
9
0
0
0
0

Round-Bottom and Florence Flasks Blown from Glass Tube

A round-bottom flask is a glass sphere on a tubular neck: the round shape heats evenly and stands up to vacuum, so it is the flask for boiling and distilling. Blow it from the end of a borosilicate tube; flatten the bottom while soft and it becomes a Florence flask that stands on the bench. The picture: our diagram of the steps, from tube to round-bottom and Florence flask.
උසස්
An hour per flask, plus annealing

උපදෙස්

1

Close and gather

Close one end of the tube in the flame as for a test tube. Keep heating and turning the closed end, pushing gently, so glass gathers into a thick knob for the bulb.

මෙම පියවර සඳහා ද්‍රව්‍ය:

වීදුරු නල කට්ටලයවීදුරු නල කට්ටලය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
ආරක්ෂිත කණ්ණාඩිආරක්ෂිත කණ්ණාඩි
තාපයට ඔරොත්තු දෙන අත්වැසුම්තාපයට ඔරොත්තු දෙන අත්වැසුම්
2

Blow the bulb

Take the gather out of the flame and blow gently into the open end while turning, so the bulb grows round. Reheat and blow again until it is the size you want.

අවශ්‍ය මෙවලම්:

මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
ඩිජිටල් කැලිපරය අඟල් 6ඩිජිටල් කැලිපරය අඟල් 6
ආරක්ෂිත කණ්ණාඩිආරක්ෂිත කණ්ණාඩි
3

Flat bottom for a Florence flask

For a flask that stands, soften the bottom of the bulb and press it gently on a flat plate.

අවශ්‍ය මෙවලම්:

මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
තාපයට ඔරොත්තු දෙන අත්වැසුම්තාපයට ඔරොත්තු දෙන අත්වැසුම්
4

Cut and finish the neck

Score and snap the tube to neck length, fire the edge smooth and flare it a little with the jacks so a stopper or joint fits.

අවශ්‍ය මෙවලම්:

දියමන්ති සලකුණු කටුවදියමන්ති සලකුණු කටුව
මේස වීදුරු පිඹීමේ පන්දමමේස වීදුරු පිඹීමේ පන්දම
Jacks (වීදුරු කර්මාන්තකරුගේ අඬු)Jacks (වීදුරු කර්මාන්තකරුගේ අඬු)
5

Anneal and check

Anneal in the kiln at the glass's annealing temperature and cool slowly. Fill with measured water to find and mark the volume. Stand round flasks in a cork ring.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ජලයජලය1 ලීටර්

අවශ්‍ය මෙවලම්:

පිළිස්සුම් උදුනපිළිස්සුම් උදුන
මනින සිලින්ඩරයමනින සිලින්ඩරය
දියමන්ති සලකුණු කටුවදියමන්ති සලකුණු කටුව
6

Bulb size for a volume

Jupyter සටහන් පොත පූරණය වෙමින්…
7

Limits

The flask's form and why it is round are from Wikipedia; the blowing is our lampwork practice. Heat only borosilicate flasks, and never boil in a flask with a scratched or unannealed wall.

ද්‍රව්‍ය

2
  • ස්ථානගත
  • 1 ලීටර්
    ස්ථානගත

අවශ්‍ය මෙවලම්

8

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...