සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Strontium-Calcium Ferrite Disc Magnet: 0.08 mol SrCO3 and 0.02 mol CaCO3, 1280 °C (Went, Philips 1956, Ex. 23)
Charlie

නිර්මාතෘ

Charlie

28. ඔක්තෝබර් 2026DE
4
0
0
0
0

Strontium-Calcium Ferrite Disc Magnet: 0.08 mol SrCO3 and 0.02 mol CaCO3, 1280 °C (Went, Philips 1956, Ex. 23)

A strontium ferrite with a fifth of the strontium replaced by calcium: 0.08 mol strontium carbonate and 0.02 mol calcium carbonate to 0.6 mol iron oxide, ground, dried, formed and passed through a 1280 °C furnace in 10 minutes. Went's rod held 2,320 gauss with a coercive force of 1,395 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 23. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
උසස්
2 days

උපදෙස්

1

Weigh the carbonates and iron oxide

Weigh 11.81 g strontium carbonate (0.08 mol), 2.002 g calcium carbonate (0.02 mol), 95.55 g ferric oxide (0.6 mol).

මෙම පියවර සඳහා ද්‍රව්‍ය:

ස්ට්‍රොන්ෂියම් කාබනේට්ස්ට්‍රොන්ෂියම් කාබනේට්11.81 ග්‍රෑ
කැල්සියම් කාබනේට් (සුදු හුණු)කැල්සියම් කාබනේට් (සුදු හුණු)2.002 ග්‍රෑ
ෆෙරික් ඔක්සයිඩ්ෆෙරික් ඔක්සයිඩ්95.55 ග්‍රෑ

අවශ්‍ය මෙවලම්:

තුලාවතුලාව
P100 ශ්වසන ආවරණයP100 ශ්වසන ආවරණය
2

Mill with alcohol 4 hours, dry

As in Examples 18 to 21: grind the mixture with alcohol in a ball mill for 4 hours, then dry it.

අවශ්‍ය මෙවලම්:

යකඩ බෝල් මිලයකඩ බෝල් මිල
එතනෝල් - රසායනාගාර ශ්‍රේණිය, 95 %එතනෝල් - රසායනාගාර ශ්‍රේණිය, 95 %
වේළන උදුනවේළන උදුන
3

Press at 1.5 t/cm²

Example 23 does not say whether the 1000 °C presinter of Examples 18 to 21 is used. Press the dry powder at 1.5 tonnes per cm² (ours: discs instead of a rod).

අවශ්‍ය මෙවලම්:

හයිඩ්‍රොලික් මුද්‍රණ යන්ත්‍රයහයිඩ්‍රොලික් මුද්‍රණ යන්ත්‍රය
තැටි තද කරන ඩයියතැටි තද කරන ඩයිය
4

Pass through a 1280 °C zone in 10 minutes

Sinter at 1280 °C by passing the pieces through a 10 cm hot zone at 10 mm per minute: 10 minutes in the heat.

අවශ්‍ය මෙවලම්:

නළ උදුනනළ උදුන
තාපයට ඔරොත්තු දෙන අත්වැසුම්තාපයට ඔරොත්තු දෙන අත්වැසුම්
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

අවශ්‍ය මෙවලම්:

විද්‍යුත් චුම්බකයවිද්‍යුත් චුම්බකය
මාලිමාවමාලිමාව

ද්‍රව්‍ය

3

අවශ්‍ය මෙවලම්

11

මෙම සැලසුම සාදන්නේ

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...