සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide
Charlie

නිර්මාතෘ

Charlie

19. ඔක්තෝබර් 2026DE
7
0
0
0
0

Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide

Terephthalic acid is the acid half of PET. Both methyl groups of para-xylene are burnt to acid groups by air under pressure in hot acetic acid, with a little manganese salt and bromide as catalyst: the Mid-Century process of Saffer and Barker (US 2,833,816, 1958). The acid does not dissolve, so it is simply filtered off. Example 24 of the patent, all parts by weight. The picture: our diagram of the reactor.
උසස්
1 day

උපදෙස්

1

Charge the reactor

Into a corrosion-resistant pressure reactor with a water-cooled condenser on top, put 75 parts para-xylene, 150 parts acetic acid, 1 part manganese acetate (tetrahydrate) and 0.75 part ammonium bromide.

මෙම පියවර සඳහා ද්‍රව්‍ය:

පැරා-සයිලීන්පැරා-සයිලීන්75 parts

අවශ්‍ය මෙවලම්:

ඇසිටික් අම්ලය (ග්ලැසියල්)ඇසිටික් අම්ලය (ග්ලැසියල්)
මැංගනීස් ඇසිටේට්මැංගනීස් ඇසිටේට්
ඇමෝනියම් බ්‍රෝමයිඩ්ඇමෝනියම් බ්‍රෝමයිඩ්
තුලාවතුලාව
පීඩන ප්‍රතික්‍රියාකාරකයපීඩන ප්‍රතික්‍රියාකාරකය
කන්ඩෙන්සරයේ කුණ්ඩලයකන්ඩෙන්සරයේ කුණ්ඩලය
රසායනික ඉසීම් කණ්ණාඩියරසායනික ඉසීම් කණ්ණාඩිය
රසායනිකවලට ඔරොත්තු දෙන අත්වැසුම්රසායනිකවලට ඔරොත්තු දෙන අත්වැසුම්
2

Pressurise with air and heat to 385 °F

Raise the pressure to 400 psig with air, blown in near the bottom. Set the vent so gas leaves at 3,000 volumes per hour per volume of liquid. Heat to 385 °F (196 °C), then switch the heat off: the reaction heats itself.

අවශ්‍ය මෙවලම්:

පීඩන ප්‍රතික්‍රියාකාරකයපීඩන ප්‍රතික්‍රියාකාරකය
කාර්මික වායු සම්පීඩකයකාර්මික වායු සම්පීඩකය
කන්ඩෙන්සරයේ කුණ්ඩලයකන්ඩෙන්සරයේ කුණ්ඩලය
රසායනාගාර උෂ්ණත්වමානයරසායනාගාර උෂ්ණත්වමානය
3

Hold at 385–400 °F

Once the first rush is over, heat as needed to hold 385–400 °F (196–204 °C), 1.5 hours in all. It is finished when the exit gas is back to 20–21 % oxygen (Orsat analysis).

අවශ්‍ය මෙවලම්:

පීඩන ප්‍රතික්‍රියාකාරකයපීඩන ප්‍රතික්‍රියාකාරකය
රසායනාගාර උෂ්ණත්වමානයරසායනාගාර උෂ්ණත්වමානය
ඔර්සැට් වායු විශ්ලේෂකයඔර්සැට් වායු විශ්ලේෂකය
4

Cool, empty and filter

Cool to 185 °F (85 °C) and let the pressure off. Push the liquid out at 150–200 °F with nitrogen pressure, scrape out the solid, and filter everything together.

අවශ්‍ය මෙවලම්:

නයිට්‍රජන් වායු සිලින්ඩරයනයිට්‍රජන් වායු සිලින්ඩරය
වීදුරු පුනීලය — නාළය සහිතවීදුරු පුනීලය — නාළය සහිත
පෙරන කඩදාසිපෙරන කඩදාසි
රසායනිකවලට ඔරොත්තු දෙන අත්වැසුම්රසායනිකවලට ඔරොත්තු දෙන අත්වැසුම්
5

Wash and dry

Wash the terephthalic acid twice with hot acetic acid (75 ml each in the example) and dry it. The patent got 115 parts by weight from 100 of para-xylene.

අවශ්‍ය මෙවලම්:

ඇසිටික් අම්ලය (ග්ලැසියල්)ඇසිටික් අම්ලය (ග්ලැසියල්)
වීදුරු පුනීලය — නාළය සහිතවීදුරු පුනීලය — නාළය සහිත
පෙරන කඩදාසිපෙරන කඩදාසි
වේළන උදුනවේළන උදුන

ද්‍රව්‍ය

1

අවශ්‍ය මෙවලම්

15

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...