කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It
Martin

නිර්මාතෘ

Martin

6. ඔක්තෝබර් 2026NO
35
0
0
0
0

The Tank-Headed Self-Feeding Brush: Soap in the Tank, a Plate to Meter It

Scrubbing a floor means going back to the bucket every few strokes. Ernest N. Broderick of Indianapolis received US 639,348, dated 19 December 1899, for a cleaning brush with a small tank on its perforated top, fed through a hollow handle from a hose; a perforated plate slid by a screw sets how far the holes open, and soap in the tank turns the water to suds — "a self-feeding brush." This rung works out how the sliding plate opens the holes, then builds the tank on a scrub brush and measures the flow at each plate setting.
මධ්‍යම
About 4 hours

උපදෙස්

1

Open area of the plate

Jupyter සටහන් පොත පූරණය වෙමින්…
2

A scrubbing brush before it

The embedded blueprint holds two brush heads on a sprung holder. Broderick puts a water tank on the head and feeds it through the handle.
3

Read US 639,348

"When used for scrubbing, the hose can be connected to a hydrant, and thus supply the desired amount of water to the brush, making it unnecessary to dip the brush into the bucket or tub of water. In other words, my device is a self-feeding brush. Should I desire to use soapy water, I can insert through the openings 10 particles of soap or soap powder. In this way I get soapsuds, which I use in scrubbing as it is needed, keeping the brush constantly supplied."
4

Perforate the brush back

Drill fourteen 4 mm holes through the scrub brush's back between the tufts, in two rows 30 mm apart.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ඔරවන බුරුසුවඔරවන බුරුසුව1 කැබැල්ල

අවශ්‍ය මෙවලම්:

බංකු තද කරන්නාබංකු තද කරන්නා
රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
ස්ථිර මාකරයස්ථිර මාකරය
රූලක්රූලක්
පැහැදිලි ආරක්ෂක කණ්ණාඩියපැහැදිලි ආරක්ෂක කණ්ණාඩිය
5

Make the sliding plate

Cut an aluminium plate 10 mm shorter than the back. Drill it through the back's holes, then file its end square. Rivet two guide strips to the back's top so it slides lengthwise.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ඇලුමිනියම් තහඩුවඇලුමිනියම් තහඩුව1 කැබැල්ල
පොප් රිවට්පොප් රිවට්1 කැබැල්ල

අවශ්‍ය මෙවලම්:

තහඩු කපන කතුරතහඩු කපන කතුර
රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
කියතුරු (අත් කියතුර)කියතුරු (අත් කියතුර)
පොප් රිවට් තුවක්කු කට්ටලයපොප් රිවට් තුවක්කු කට්ටලය
6

Build the tank

Fold an aluminium box 50 mm deep to the back's size with a lid. Drill the lid for a 25 mm filling hole and a handle socket. Seal it to the back with silicone and screws.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ඇලුමිනියම් තහඩුවඇලුමිනියම් තහඩුව1 කැබැල්ල
පොප් රිවට්පොප් රිවට්1 කැබැල්ල
සිලිකෝන් මුද්‍රාවසිලිකෝන් මුද්‍රාව1 කැබැල්ල
ලී ඉස්කුරුප්පුව #8 × අඟල් 1ලී ඉස්කුරුප්පුව #8 × අඟල් 11 කැබැල්ල

අවශ්‍ය මෙවලම්:

තහඩු කපන කතුරතහඩු කපන කතුර
බංකු තද කරන්නාබංකු තද කරන්නා
පොප් රිවට් තුවක්කු කට්ටලයපොප් රිවට් තුවක්කු කට්ටලය
රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
සම් වැඩ අත්වැසුම්සම් වැඩ අත්වැසුම්
7

Fit the adjusting screw

Run an M4 screw through a nut epoxied on the tank's end wall so its tip pushes the plate. Turn it to close or open the holes.

මෙම පියවර සඳහා ද්‍රව්‍ය:

යන්ත්‍ර ඉස්කුරුප්පුයන්ත්‍ර ඉස්කුරුප්පු1 කැබැල්ල
ෂඩාස්‍ර ඇණ බෝල්තුවෂඩාස්‍ර ඇණ බෝල්තුව1 කැබැල්ල
කොටස් දෙකේ එපොක්සිකොටස් දෙකේ එපොක්සි1 කැබැල්ල

අවශ්‍ය මෙවලම්:

රැහැන් රහිත සිදුරු යන්ත්‍රයරැහැන් රහිත සිදුරු යන්ත්‍රය
සිදුරු කරන තුඩු කට්ටලයසිදුරු කරන තුඩු කට්ටලය
ඉස්කුරුප්පු නියන කට්ටලයඉස්කුරුප්පු නියන කට්ටලය
8

Fit the handle

Fix 1.2 m of 15 mm copper tube in the socket with brass fittings. Fit a ball valve and hose connector at its top.

මෙම පියවර සඳහා ද්‍රව්‍ය:

තඹ නළයතඹ නළය1 කැබැල්ල
පිත්තල සවි කිරීම්පිත්තල සවි කිරීම්1 කැබැල්ල
බෝල කපාටයබෝල කපාටය1 කැබැල්ල
PTFE නූල් මුද්‍රා පටියPTFE නූල් මුද්‍රා පටිය1 කැබැල්ල

අවශ්‍ය මෙවලම්:

නළ කපනයනළ කපනය
සීරුම් රැන්ච්සීරුම් රැන්ච්
9

The patent drawing

US 639,348 drawing sheet, public domain (expired patent).
පියවර 9 - Image 1
10

Measure the flow at each setting

Connect the garden hose. Set the plate fully open, half and nearly shut, and catch the water for 30 s each in the jug. Then add a squirt of soap through the filling hole and scrub.
පියවර 10 - Image 1

මෙම පියවර සඳහා ද්‍රව්‍ය:

උද්‍යාන නළයඋද්‍යාන නළය1 කැබැල්ල
ජලයජලය1 කැබැල්ල
කැස්ටයිල් සබන් (ද්‍රව)කැස්ටයිල් සබන් (ද්‍රව)1 කැබැල්ල

අවශ්‍ය මෙවලම්:

මනින ජෝගුවමනින ජෝගුව
නැවතුම් ඔරලෝසුවනැවතුම් ඔරලෝසුව
ඩිජිටල් කැලිපරය අඟල් 6ඩිජිටල් කැලිපරය අඟල් 6
11

A brush that floods, starves or leaks

Tank-headed self-feeding brush troubleshooting.

Flow

Loading...
12

History and honest limits

**Ernest N. Broderick** of Indianapolis filed US 639,348 on 6 February 1899; it is dated 19 December 1899. Rubber or leather strips seal the tank to the brush-top. Two hollow adjustable joints, ground to fit and clamped by a bolt, let the handle be set at any angle, for floors, walls, windows or dusting high furniture; with compressed air instead of water it blows dust away, and a mop or duster may replace the brush. **Honest limits.** Our handle is fixed; his joints are not built here. The notebook gives open area, not flow through a real hole. Your flows are the result.

ද්‍රව්‍ය

15

අවශ්‍ය මෙවලම්

16

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...