කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Wood Chisels and Gouges Forged from Tool Steel
Forge

නිර්මාතෘ

Forge

14. ඔක්තෝබර් 2026NO
12
0
0
0
0

Wood Chisels and Gouges Forged from Tool Steel

A woodworking chisel is a flat steel blade with a bevelled edge, hardened and tempered, on a wooden handle; bevelled sides let it into tight corners. A gouge is the same with a blade curved in section, for hollowing. Forge a set of widths from tool steel, harden them, temper to a dark straw and hone them sharp. The picture: a bevel-edge wood chisel with its ferrule and wooden handle.
උසස්
A day for a set

උපදෙස්

1

Forge the blades

Draw tool-steel bar out flat to each blade width, taper it slightly toward the edge and forge a square tang on the other end. For gouges, set the hot blade over a round groove of the swage block and drive it in to curve it.

මෙම පියවර සඳහා ද්‍රව්‍ය:

පැතලි මෙවලම් වානේ දණ්ඩපැතලි මෙවලම් වානේ දණ්ඩ1 කැබැල්ල
අඟුරුඅඟුරු1 as required

අවශ්‍ය මෙවලම්:

කම්මල් උදුනකම්මල් උදුන
නියන (ඇන්විලය)නියන (ඇන්විලය)
හරස් කුඤ්ඤ හිසක් සහිත මිටියහරස් කුඤ්ඤ හිසක් සහිත මිටිය
සිදුරු සහිත හැඩ ගන්වන කුට්ටියසිදුරු සහිත හැඩ ගන්වන කුට්ටිය
කම්මල්කරුගේ අඬුවකම්මල්කරුගේ අඬුව
වෑල්ඩින් අත්වැසුම්වෑල්ඩින් අත්වැසුම්
ආරක්ෂිත කණ්ණාඩිආරක්ෂිත කණ්ණාඩි
2

File and bevel

Anneal by cooling slowly in the ashes, then file the faces flat, file the side bevels, and file the edge bevel, leaving it a little thick.

අවශ්‍ය මෙවලම්:

ලෝහ කටුවලෝහ කටුව
3

Harden and temper

Heat the blade evenly to a cherry red and quench it in water. Polish it bright, then heat the back gently and quench again as soon as a dark straw colour reaches the edge.

මෙම පියවර සඳහා ද්‍රව්‍ය:

ජලයජලය10 ලීටර්

අවශ්‍ය මෙවලම්:

කම්මල් උදුනකම්මල් උදුන
නිවීමේ බාල්දියනිවීමේ බාල්දිය
කම්මල්කරුගේ අඬුවකම්මල්කරුගේ අඬුව
වෑල්ඩින් අත්වැසුම්වෑල්ඩින් අත්වැසුම්
ආරක්ෂිත කණ්ණාඩිආරක්ෂිත කණ්ණාඩි
4

Handles

Turn hardwood handles, fit a brass ferrule at the front of each, drill a pilot hole and drive the tang in. Oil the handles.

මෙම පියවර සඳහා ද්‍රව්‍ය:

දැඩි දැව තීරුවදැඩි දැව තීරුව2 කැබලි
පිත්තල තහඩුවපිත්තල තහඩුව1 කැබැල්ල
ලිනිසීඩ් තෙල්ලිනිසීඩ් තෙල්0.05 ලීටර්

අවශ්‍ය මෙවලම්:

ලී කරකැවීමේ යන්ත්‍රයලී කරකැවීමේ යන්ත්‍රය
අත් විදුමඅත් විදුම
5

Hone

Flatten each back on the stone and hone the bevel until a fine burr forms, then remove it.

අවශ්‍ය මෙවලම්:

රළු බව 1000 මුවහත් ගලරළු බව 1000 මුවහත් ගල
6

Temper colours

Jupyter සටහන් පොත පූරණය වෙමින්…

ද්‍රව්‍ය

6
  • ස්ථානගත
  • 1 as required
    ස්ථානගත
  • 10 ලීටර්
    ස්ථානගත
  • ස්ථානගත
  • 1 කැබැල්ල
    ස්ථානගත
  • ස්ථානගත

අවශ්‍ය මෙවලම්

12

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...