සහයෝගීතාව
කලාව
රූපලාවණ්‍ය සහ සුවතාව
ශිල්පය
සංස්කෘතිය සහ ඉතිහාසය
විනෝදාස්වාදය
පරිසරය
ආහාර සහ පාන
ප්‍රතිලෝම ඉංජිනේරු
විද්‍යාවන්
ක්‍රීඩා
තාක්ෂණය
පැළඳිය හැකි
Woven Wire Screen Cloth on a Power Loom, 4 to 80 Wires per Inch (Bigelow, US 18,320, 1857)
Charlie

නිර්මාතෘ

Charlie

31. ඔක්තෝබර් 2026DE
2
0
0
1
0

Woven Wire Screen Cloth on a Power Loom, 4 to 80 Wires per Inch (Bigelow, US 18,320, 1857)

Wide wire cloth used to need two weavers on a hand loom, one each side, throwing the shuttle and straightening every filling wire by hand. Bigelow's power loom drives the shuttle positively, straightens the wire as it pays out and holds the selvages so the cloth keeps its width. Result: woven wire screen cloth, 4 to 80 wires per inch. Source: Bigelow, US 18,320 (1857). Unknown: the wire metal; Bigelow does not give it. Not given: wire gauge. Picture drawn by Youblob.
උසස්
Factory process

උපදෙස්

1

Warp the loom

Wind the warp wires on the warp beam and lead them round the vibrating roller, through the harnesses and the reed, to the take-up rollers. Unknown: the wire metal; Bigelow does not give it.

මෙම පියවර සඳහා ද්‍රව්‍ය:

නොදන්නා ලෝහයනොදන්නා ලෝහය1 as required

අවශ්‍ය මෙවලම්:

කම්බි දැල් වියන යන්ත්‍රයකම්බි දැල් වියන යන්ත්‍රය
2

Set the take-up for the mesh

Change the intermediate wheel and pinion so the take-up rollers move the cloth on by one wire space for every filling wire: 4 to 80 wires per inch.

අවශ්‍ය මෙවලම්:

කම්බි දැල් වියන යන්ත්‍රයකම්බි දැල් වියන යන්ත්‍රය
3

Shoot the filling wire

The shuttle is driven across the shed; the filling wire is pulled through its straightener as it pays out. Pointed bars hold the selvages so the pull does not draw the cloth in.

මෙම පියවර සඳහා ද්‍රව්‍ය:

නොදන්නා ලෝහයනොදන්නා ලෝහය1 as required

අවශ්‍ය මෙවලම්:

කම්බි දැල් වියන යන්ත්‍රයකම්බි දැල් වියන යන්ත්‍රය
4

Beat up

The lathe beats the wire up to the cloth with a double action, alike on both edges. The loom stops itself if a warp or the filling wire breaks.

අවශ්‍ය මෙවලම්:

කම්බි දැල් වියන යන්ත්‍රයකම්බි දැල් වියන යන්ත්‍රය
5

Optional: crimp the filling first

Pass the filling wire through fluted rollers, flutes sized to the mesh, then let nippers draw each cut length into the shed instead of the shuttle.

අවශ්‍ය මෙවලම්:

කම්බි දැල් වියන යන්ත්‍රයකම්බි දැල් වියන යන්ත්‍රය

ද්‍රව්‍ය

1

අවශ්‍ය මෙවලම්

1

සම්බන්ධ බ්ලූප්‍රින්ට්

මෙම බ්ලූප්‍රින්ට් දැනුම බෙදා ගනී — ශිල්ප ක්‍රම, ද්‍රව්‍ය හෝ මූලධර්ම

CC0 පොදු වසම

මෙම බ්ලූප්‍රින්ට් CC0 යටතේ නිකුත් කර ඇත. ඔබට අවසර නොමැතිව පිටපත් කිරීම, වෙනස් කිරීම, බෙදා හැරීම සහ භාවිතා කිරීම කළ හැක.

බ්ලූප්‍රින්ට් හරහා නිෂ්පාදන මිලදී ගැනීමෙන් නිර්මාතෘට සහාය වන්න නිර්මාතෘ කොමිසම විකුණුම්කරුවන් විසින් නියම කළ, හෝ මෙම බ්ලූප්‍රින්ට්හි නව අනුවාදයක් සාදා ආදායම බෙදා ගැනීමට ඔබේ බ්ලූප්‍රින්ට්හි සම්බන්ධතාවයක් ලෙස ඇතුළත් කරන්න.

සාකච්ඡාව

(0)

පිවිසෙන්න සාකච්ඡාවට එක්වීමට

අදහස් පූරණය කරමින්...