အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Barium-Calcium Ferrite Disc Magnet: 20 % Calcium, 5 Minutes at 1290 °C (Went, Philips 1956, Ex. 20)
Charlie

ဖန်တီးသူ

Charlie

28. အောက်တိုဘာ 2026DE
၂
၀
၀
၀
၀

Barium-Calcium Ferrite Disc Magnet: 20 % Calcium, 5 Minutes at 1290 °C (Went, Philips 1956, Ex. 20)

A ceramic magnet with a fifth of the barium replaced by calcium: 0.08 mol barium carbonate, 0.02 mol calcium carbonate and 0.6 mol iron oxide, made as in Example 18 but sintered at 1290 °C for only 5 minutes. Went's rod held 1,615 gauss with a coercive force of 1,550 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 20. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
အဆင့်မြင့်
2 days

ညွှန်ကြားချက်များ

1

Weigh barium carbonate, chalk and iron oxide

Weigh 15.79 g barium carbonate (0.08 mol), 2.002 g calcium carbonate (0.02 mol) and 95.55 g ferric oxide (0.6 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ဘေရီယမ်ကာဗွန်နိတ် (ဝစ်သာရိုက်)ဘေရီယမ်ကာဗွန်နိတ် (ဝစ်သာရိုက်)15.79 ဂရမ်
ကယ်လ်စီယမ်ကာဗွန်နိတ် (ထုံးဖြူမှုန့်)ကယ်လ်စီယမ်ကာဗွန်နိတ် (ထုံးဖြူမှုန့်)2.002 ဂရမ်
ဖယ်ရစ်အောက်ဆိုဒ်ဖယ်ရစ်အောက်ဆိုဒ်95.55 ဂရမ်

လိုအပ်သော ကိရိယာများ:

လက်တံညီ ချိန်ခွင်လက်တံညီ ချိန်ခွင်
ရာဘာလက်အိတ်ရာဘာလက်အိတ်
P100 အသက်ရှူကာP100 အသက်ရှူကာ
2

Mill, presinter and mill as in Example 18

As in Example 18: grind with alcohol 4 hours, dry at 150 °C, fire in air at 1000 °C for 2 hours, grind again 4 hours and dry.

လိုအပ်သော ကိရိယာများ:

သံလုံး ဘောလ်စက်သံလုံး ဘောလ်စက်
အီသနော - ဓာတ်ခွဲခန်းအဆင့်၊ 95 %အီသနော - ဓာတ်ခွဲခန်းအဆင့်၊ 95 %
အခြောက်ခံမီးဖိုအခြောက်ခံမီးဖို
မာဖယ်မီးဖိုမာဖယ်မီးဖို
အဖုံးပါ ပူချက်ခွက် (ကြွေထည်)အဖုံးပါ ပူချက်ခွက် (ကြွေထည်)
မီးခံခွက်ညှပ်မီးခံခွက်ညှပ်
3

Press at 1.5 t/cm²

Press at 1.5 tonnes per cm², as in Example 18 (ours: discs instead of rods).

လိုအပ်သော ကိရိယာများ:

ဟိုက်ဒရောလစ် ဖိစက်ဟိုက်ဒရောလစ် ဖိစက်
ဒစ်ပြား ဖိသိပ်ပုံစံခွက်ဒစ်ပြား ဖိသိပ်ပုံစံခွက်
4

Pass through a 1290 °C zone in 5 minutes

Sinter in air at 1290 °C by passing the pieces through a 10 cm hot zone at 20 mm per minute: 5 minutes in the heat.

လိုအပ်သော ကိရိယာများ:

ပြွန်မီးဖိုပြွန်မီးဖို
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

လိုအပ်သော ကိရိယာများ:

လျှပ်စစ်သံလိုက်လျှပ်စစ်သံလိုက်
သံလိုက်အိမ်မြှောင်သံလိုက်အိမ်မြှောင်

ပစ္စည်းများ

3

လိုအပ်သော ကိရိယာများ

15

ဤဘလူးပရင့်က ပြုလုပ်သည်

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...