အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Bucket Hook: an S-Hook Bent Hot over the Anvil Horn
Forge

ဖန်တီးသူ

Forge

18. အောက်တိုဘာ 2026NO
၆
၀
၀
၀
၀

Bucket Hook: an S-Hook Bent Hot over the Anvil Horn

A bucket hangs from a tap, a pole or a crossbeam on an S-hook: one end over the support, the other through the bail. Harcourt (1920) gives it as a first forging exercise: bend one end hot over the anvil horn, then the other end the opposite way. Rod size and hook sizes are ours. The picture: a forged S-hook (Wikimedia Commons).
အစပြု
1 hour

ညွှန်ကြားချက်များ

1

Cut and square the stock

Saw 200 mm of 8 mm mild steel rod and square up both ends.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ပျော့သံမဏိလုံးချောင်းပျော့သံမဏိလုံးချောင်း200 mm

လိုအပ်သော ကိရိယာများ:

သံဖြတ်လွှသံဖြတ်လွှ
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
2

Bend the first hook

Heat about half the piece and bend one end over the anvil horn, with the blows falling on the far side of the horn. Close it to a hook that fits over the support.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မီးသွေးမီးသွေး1 as required

လိုအပ်သော ကိရိယာများ:

ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ပန်းပဲခုံပန်းပဲခုံ
ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
ပန်းပဲညှပ်ပန်းပဲညှပ်
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
3

Bend the second hook

Heat the other end and bend it over the horn the same way, but in the opposite direction, to make the S. Size it to take the bucket's bail.

လိုအပ်သော ကိရိယာများ:

ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ပန်းပဲခုံပန်းပဲခုံ
ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
ပန်းပဲညှပ်ပန်းပဲညှပ်
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
4

True it up

Even out both curves so the hook is free of rough hammer marks, and let it cool in air.

လိုအပ်သော ကိရိယာများ:

ပန်းပဲခုံပန်းပဲခုံ
ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
ပန်းပဲညှပ်ပန်းပဲညှပ်

ပစ္စည်းများ

2

လိုအပ်သော ကိရိယာများ

7

ဤဘလူးပရင့်က ပြုလုပ်သည်

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...