အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ

ပိုလီမာ

ဘလူးပရင့် ၄၂ ခု ရရှိနိုင်သည်

ဘလူးပရင့်များ (၄၂)

Clear Adhesive Tape: Rubber and Rosin Cement on a Clear Cellulose Film, Drew 1939

Clear Adhesive Tape: Rubber and Rosin Cement on a Clear Cellulose Film, Drew 1939

Mary မှFI

ဓာတုဗေဒ

၃
၀
၀
၀
၀
၀
Ebonite Rod: Rubber and an Equal Weight of Sulphur, Cured Hours in the Heat, Goodyear 1851

Ebonite Rod: Rubber and an Equal Weight of Sulphur, Cured Hours in the Heat, Goodyear 1851

Mary မှFI

ဓာတုဗေဒ

၁
၀
၀
၀
၀
၀
Two-Part Epoxy Glue: Bis-Phenol Resin Thinned with Allyl Glycidyl Ether, Hardened with Diethylene Triamine

Two-Part Epoxy Glue: Bis-Phenol Resin Thinned with Allyl Glycidyl Ether, Hardened with Diethylene Triamine

Woody မှNO

သစ်သားလုပ်ငန်း

၃
၀
၀
၀
၀
၀
Bisphenol Epoxy Resin: Bisphenol A and Epichlorohydrin in Caustic Soda, Wiles and Newey 1950
အန္တရာယ်ရှိ

Bisphenol Epoxy Resin: Bisphenol A and Epichlorohydrin in Caustic Soda, Wiles and Newey 1950

Charlie မှDE

ဓာတုဗေဒ

၁
၀
၀
၀
၀
၀
Silicone Rubber Compound: Dimethyl Silicone Oil Gelled with Ferric Oxide, Agens 1948

Silicone Rubber Compound: Dimethyl Silicone Oil Gelled with Ferric Oxide, Agens 1948

Mary မှFI

ဓာတုဗေဒ

၄
၀
၀
၀
၀
၀
Dimethyl Silicone Oil: Dimethyldichlorosilane Hydrolysed in Dilute Hydrochloric Acid, Agens 1948
အန္တရာယ်ရှိ

Dimethyl Silicone Oil: Dimethyldichlorosilane Hydrolysed in Dilute Hydrochloric Acid, Agens 1948

Charlie မှDE

ဓာတုဗေဒ

၁
၀
၀
၀
၀
၀
Nylon 66 Pellets: Nylon Salt Polymerised in an Autoclave, Carothers 1938

Nylon 66 Pellets: Nylon Salt Polymerised in an Autoclave, Carothers 1938

Mary မှFI

ဓာတုဗေဒ

၆
၀
၀
၀
၀
၀
Nylon Salt: Hexamethylenediamine and Adipic Acid Crystallized from Alcohol, Carothers 1938

Nylon Salt: Hexamethylenediamine and Adipic Acid Crystallized from Alcohol, Carothers 1938

Tex မှFO

ဓာတုဗေဒ

၁
၀
၀
၀
၀
၀
Wire Enamel: Polyvinyl Formal and Cresol Resin in Solvent, Jackson and Hall 1938
အန္တရာယ်ရှိ

Wire Enamel: Polyvinyl Formal and Cresol Resin in Solvent, Jackson and Hall 1938

Charlie မှDE

ဓာတုဗေဒ

၀
၀
၀
၀
၀
၀
Cresol-Formaldehyde Resin for Wire Enamel, Jackson and Hall 1938
အန္တရာယ်ရှိ

Cresol-Formaldehyde Resin for Wire Enamel, Jackson and Hall 1938

Charlie မှDE

ဓာတုဗေဒ

၁
၀
၀
၀
၀
၀
Polyvinyl Formal: Polyvinyl Acetate Acetalised with Formalin, Shawinigan 1933
အန္တရာယ်ရှိ

Polyvinyl Formal: Polyvinyl Acetate Acetalised with Formalin, Shawinigan 1933

Charlie မှDE

ဓာတုဗေဒ

၃
၀
၀
၀
၀
၀
Polyvinyl Alcohol: Polyvinyl Acetate Stirred in Alcoholic Potash

Polyvinyl Alcohol: Polyvinyl Acetate Stirred in Alcoholic Potash

Charlie မှDE

ဓာတုဗေဒ

၅
၀
၀
၀
၀
၀
Polyvinyl Acetate: Vinyl Acetate Set Solid by Sunlight

Polyvinyl Acetate: Vinyl Acetate Set Solid by Sunlight

Charlie မှDE

ဓာတုဗေဒ

၂
၀
၀
၀
၀
၀
HDPE Pellets: Ethylene Polymerised in a Fluidised Bed

HDPE Pellets: Ethylene Polymerised in a Fluidised Bed

Charlie မှDE

ဓာတုဗေဒ

၁
၀
၀
၀
၀
၀
Polypropylene Pellets by Bulk Polymerisation in Liquid Propylene

Polypropylene Pellets by Bulk Polymerisation in Liquid Propylene

Charlie မှDE

ဓာတုဗေဒ

၄
၀
၀
၀
၀
၀
Glyptal Resin from Glycerin and Phthalic Anhydride: Callahan, 1914

Glyptal Resin from Glycerin and Phthalic Anhydride: Callahan, 1914

Charlie မှDE

ပိုလီမာ

၁၉
၀
၀
၀
၀
၀
Permanent Marker: Ink, Moulded Barrel, Reservoir and Nib

Permanent Marker: Ink, Moulded Barrel, Reservoir and Nib

Emma မှSE

ပိုလီမာ

၂၀
၀
၀
၀
၀
၀
Nitrile Gloves by Dip Moulding

Nitrile Gloves by Dip Moulding

Emma မှSE

ပိုလီမာ

၂၄
၀
၀
၀
၀
၀
N95 Respirator: Melt-Blown, Charged and Welded

N95 Respirator: Melt-Blown, Charged and Welded

Emma မှSE

ပိုလီမာ

၁၄
၀
၀
၀
၀
၀
Safety Spectacles: Moulded Polycarbonate with a Hard Coat

Safety Spectacles: Moulded Polycarbonate with a Hard Coat

Emma မှSE

ပိုလီမာ

၃၄
၀
၀
၀
၀
၀
PVA Wood Glue by Emulsion Polymerisation

PVA Wood Glue by Emulsion Polymerisation

Charlie မှDE

ဓာတုဗေဒ

၃၁
၀
၀
၀
၀
၀
Blowing a Hollow Part: When There Is No Core

Blowing a Hollow Part: When There Is No Core

Emma မှSE

အင်ဂျင်နီယာပညာ

၃၈
၀
၀
၀
၀
၀
Designing for the Mould: Draft, Wall and the Ejector

Designing for the Mould: Draft, Wall and the Ejector

Emma မှSE

အင်ဂျင်နီယာပညာ

၄၀
၀
၀
၀
၀
၀
Extruding a Profile, and Blowing Film

Extruding a Profile, and Blowing Film

Emma မှSE

အင်ဂျင်နီယာပညာ

၄၅
၀
၀
၀
၀
၀
42 ထဲမှ 24 ကို ပြသနေသည်