အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Capillary Glass Tubes Drawn Out from Tube
Bubbles

ဖန်တီးသူ

Bubbles

14. အောက်တိုဘာ 2026IT
၁၈
၀
၀
၀
၀

Capillary Glass Tubes Drawn Out from Tube

A capillary is glass tube drawn out thin in the flame: heat a band while turning it, take it out and pull, and the tube stretches into a fine tube with a hair-thin bore. Chemists drew tubes out over a lamp this way, as Fownes's manual (1856) shows. Faster and longer pulls give finer bores. The picture: glass capillary tubes on a cutting mat.
အလယ်အလတ်
An hour

ညွှန်ကြားချက်များ

1

Heat a band

Hold a length of glass tube in both hands and turn it steadily in the torch flame, heating a band about 2 cm wide until it sags soft.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ဖန်ပြွန် အစုံဖန်ပြွန် အစုံ1 ခု

လိုအပ်သော ကိရိယာများ:

စားပွဲတင်ဖန်မှုတ်မီးတောက်စားပွဲတင်ဖန်မှုတ်မီးတောက်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
2

Out of the flame, pull

Take it out of the flame and pull your hands apart in one smooth movement, keeping it straight. A gentle pull gives a thicker capillary, a fast long one a finer bore.

လိုအပ်သော ကိရိယာများ:

ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
3

Cut to length

When cold, score the capillary with a file and snap it into lengths. For melting-point tubes, seal one end by touching it to the edge of the flame.

လိုအပ်သော ကိရိယာများ:

တံစဉ်း (လက်တံစဉ်း)တံစဉ်း (လက်တံစဉ်း)
ပေတံပေတံ
စားပွဲတင်ဖန်မှုတ်မီးတောက်စားပွဲတင်ဖန်မှုတ်မီးတောက်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
4

Check and store

Measure the outside with the caliper, sort by size and keep them in a closed jar so no dust gets in the bores.

လိုအပ်သော ကိရိယာများ:

ဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မဒစ်ဂျစ်တယ် ကာလီပါ ၆ လက်မ
ဖန်ဘူးဖန်ဘူး
5

How far to pull

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…

ပစ္စည်းများ

1

လိုအပ်သော ကိရိယာများ

7

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...