အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Coopered Vat: Oak Staves in Riveted Iron Hoops
Woody

ဖန်တီးသူ

Woody

14. အောက်တိုဘာ 2026NO
၁၈
၀
၀
၀
၀

Coopered Vat: Oak Staves in Riveted Iron Hoops

A vat is the cooper's large open tub: oak staves standing edge to edge, held tight by hoops, with a flat bottom set in a groove. Coopers made the vats beer was brewed in; papermakers and chemists use them to hold pulp, washes and settling liquors. Shave tapered staves, forge and rivet iron hoops, raise the staves in the hoops and fit the bottom. The picture: our diagram, a vat and its tapered staves.
အဆင့်မြင့်
Several days

ညွှန်ကြားချက်များ

1

Shape the staves

Rive or saw oak into staves as long as the vat is deep. Shave each one on the horse, taper it from top to bottom (step 5 gives the widths), and plane the edges so neighbours meet along their whole length.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မာကျောသောသစ်သား ပျဉ်ထူမာကျောသောသစ်သား ပျဉ်ထူ6 ခု

လိုအပ်သော ကိရိယာများ:

ဖရိုး (ခွဲဓား)ဖရိုး (ခွဲဓား)
ခြစ်ထုရုံခုံခြစ်ထုရုံခုံ
နှစ်ဖက်ကိုင် ခြစ်ဓားနှစ်ဖက်ကိုင် ခြစ်ဓား
လက်ကိုင်သစ်သားရိတ်ကိရိယာလက်ကိုင်သစ်သားရိတ်ကိရိယာ
လက်လွှလက်လွှ
2

Forge the hoops

Draw wrought iron into flat strip about 30 × 3 mm (our size), cut it to the circumference where each hoop sits plus a lap, bend it round, punch the lap and rivet it closed.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ထုလုပ်သံတုံးထုလုပ်သံတုံး3 ခု
သံရစ်ချည်များသံရစ်ချည်များ6 ခု
မီးသွေးမီးသွေး5 as required

လိုအပ်သော ကိရိယာများ:

ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ပန်းပဲခုံပန်းပဲခုံ
ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
အပူဖောက်ကိရိယာအပူဖောက်ကိရိယာ
ပန်းပဲညှပ်ပန်းပဲညှပ်
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
3

Raise the vat

Stand the staves inside a hoop, wide ends up, until the ring is closed. Drive the hoops down with a hammer and a block until the joints close tight.

လိုအပ်သော ကိရိယာများ:

ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
4

Groove and bottom

Cut a groove round the inside a little above the lower edge. Join planks into a board, scribe a circle to fit the groove, cut and bevel it, slack the lower hoop, spring the bottom in, and drive the hoop home. Fill with water: the wood swells and seals.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မာကျောသောသစ်သား ပျဉ်ထူမာကျောသောသစ်သား ပျဉ်ထူ2 ခု

လိုအပ်သော ကိရိယာများ:

ဆောက်အစုံဆောက်အစုံ
အချွန်နှစ်ချောင်းပါ ကွန်ပါအချွန်နှစ်ချောင်းပါ ကွန်ပါ
လက်လွှလက်လွှ
လက်ကိုင်သစ်သားရိတ်ကိရိယာလက်ကိုင်သစ်သားရိတ်ကိရိယာ
ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
5

Staves and hoops

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…

ပစ္စည်းများ

4

လိုအပ်သော ကိရိယာများ

13

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...