အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Copper Foil: Sheet Rolled Thin with Anneals Between Passes
Forge

ဖန်တီးသူ

Forge

14. အောက်တိုဘာ 2026NO
၂၈
၀
၀
၀
၀

Copper Foil: Sheet Rolled Thin with Anneals Between Passes

Copper foil is copper taken thinner than sheet. Copper hardens as it is worked and softens again when heated and quenched, so a sheet can be rolled down pass after pass, annealing whenever it stiffens, until it is thin enough to cut with scissors and wrap round a joint. The picture: a strip of copper foil.
အလယ်အလတ်
An afternoon

ညွှန်ကြားချက်များ

1

Anneal the sheet

Lay the copper sheet on fire bricks, heat it with the torch to a dull red seen in shade, and quench it in water.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ကြေးနီပြားကြေးနီပြား1 ခု

လိုအပ်သော ကိရိယာများ:

မီးခံအုတ်မီးခံအုတ်
ပရိုပိန်း မီးရှူးပရိုပိန်း မီးရှူး
ပန်းပဲညှပ်ပန်းပဲညှပ်
ရေချိုးပုံးရေချိုးပုံး
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
2

Roll it down

Pass it through the rolling mill, closing the rolls a little each pass and always feeding the same way.

လိုအပ်သော ကိရိယာများ:

သတ္တု လှိမ့်စက်သတ္တု လှိမ့်စက်
3

Anneal when it stiffens

When it springs back and resists, anneal it again as in step 1, dry it, and carry on rolling.

လိုအပ်သော ကိရိယာများ:

ပရိုပိန်း မီးရှူးပရိုပိန်း မီးရှူး
ပန်းပဲညှပ်ပန်းပဲညှပ်
ရေချိုးပုံးရေချိုးပုံး
4

Measure and trim

Measure the thickness with a micrometer; stop when it is as thin as you need. Trim the split edges with snips and give it a last anneal if it must bend.

လိုအပ်သော ကိရိယာများ:

မိုက်ခရိုမီတာမိုက်ခရိုမီတာ
သံပြားညှပ်ကတ်ကြေးသံပြားညှပ်ကတ်ကြေး

ပစ္စည်းများ

1

လိုအပ်သော ကိရိယာများ

8

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...