အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Ferrite Toroid Core: Magnesium-Zinc Ferrite Reheated 18 h at 1000 °C and 20 h at 750 °C (Snoek 1948, Ex. III)
Charlie

ဖန်တီးသူ

Charlie

28. အောက်တိုဘာ 2026DE
၄
၀
၀
၀
၀

Ferrite Toroid Core: Magnesium-Zinc Ferrite Reheated 18 h at 1000 °C and 20 h at 750 °C (Snoek 1948, Ex. III)

Snoek's magnesium-zinc ferrite ring (Example III), fired at 1400 °C and then given a second long treatment in oxygen: 18 hours at 1000 °C and 20 hours at 750 °C. He measured how its losses change with frequency, but gives no permeability for the reheated core. Source: J. L. Snoek, US 2,452,529 (Philips, 1948), Example III. Picture: our diagram.
အဆင့်မြင့်
3 days

ညွှန်ကြားချက်များ

1

Weigh 28 : 18 : 54 mol %

Mix 28 mol % magnesium oxide, 18 mol % zinc oxide and 54 mol % ferric oxide. Ours, by weight: 10.06 g magnesium oxide, 13.06 g zinc oxide and 76.88 g ferric oxide per 100 g.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မဂ္ဂနီစီယမ်အောက်ဆိုဒ်မဂ္ဂနီစီယမ်အောက်ဆိုဒ်10.06 ဂရမ်
ဇင့်အောက်ဆိုဒ်မှုန့်ဇင့်အောက်ဆိုဒ်မှုန့်13.06 ဂရမ်
ဖယ်ရစ်အောက်ဆိုဒ်ဖယ်ရစ်အောက်ဆိုဒ်76.88 ဂရမ်

လိုအပ်သော ကိရိယာများ:

လက်တံညီ ချိန်ခွင်လက်တံညီ ချိန်ခွင်
ဖုန်မျက်နှာဖုံးဖုန်မျက်နှာဖုံး
2

Grind 30 hours in an iron mill

Grind the mixture for 30 hours in an iron ball mill.

လိုအပ်သော ကိရိယာများ:

သံလုံး ဘောလ်စက်သံလုံး ဘောလ်စက်
ဖုန်မျက်နှာဖုံးဖုန်မျက်နှာဖုံး
3

Mould a ring at 4 tons per cm²

Mould the powder at 4 tons per square centimetre into a ring 3 cm across with a 4 × 4 mm section.

လိုအပ်သော ကိရိယာများ:

ဟိုက်ဒရောလစ် ဖိစက်ဟိုက်ဒရောလစ် ဖိစက်
လက်စွပ် ဖိပုံစံခွက်လက်စွပ် ဖိပုံစံခွက်
ဖုန်မျက်နှာဖုံးဖုန်မျက်နှာဖုံး
4

Fire 2 hours at 1400 °C, cool 5–10 °C a minute

Heat the ring in oxygen for 2 hours at 1400 °C and cool it slowly in oxygen at 5 to 10 °C per minute.

လိုအပ်သော ကိရိယာများ:

ပြွန်မီးဖိုပြွန်မီးဖို
အောက်ဆီဂျင်အောက်ဆီဂျင်
ဖိအားပါ ဓာတ်ငွေ့ အိုးဖိအားပါ ဓာတ်ငွေ့ အိုး
ပိုင်ရိုမီတာပိုင်ရိုမီတာ
မီးခံခွက်ညှပ်မီးခံခွက်ညှပ်
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
5

Reheat: 18 hours at 1000 °C, 20 hours at 750 °C

Heat the cooled core to 1000 °C and hold it there for 18 hours, then at 750 °C for 20 hours, and cool slowly again, all in oxygen. Snoek shows the resulting losses only as a curve; he gives no permeability for it.

လိုအပ်သော ကိရိယာများ:

ပြွန်မီးဖိုပြွန်မီးဖို
အောက်ဆီဂျင်အောက်ဆီဂျင်
ဖိအားပါ ဓာတ်ငွေ့ အိုးဖိအားပါ ဓာတ်ငွေ့ အိုး
ပိုင်ရိုမီတာပိုင်ရိုမီတာ
မီးခံခွက်ညှပ်မီးခံခွက်ညှပ်
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်

ပစ္စည်းများ

3

လိုအပ်သော ကိရိယာများ

11

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...