အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Ferroboron: Colemanite Reduced by Ferrosilicon above 2000 °C in an Arc Furnace (Hansen, GE, US 982,135, 1911)
Charlie

ဖန်တီးသူ

Charlie

31. အောက်တိုဘာ 2026DE
၀
၀
၀
၀
၀

Ferroboron: Colemanite Reduced by Ferrosilicon above 2000 °C in an Arc Furnace (Hansen, GE, US 982,135, 1911)

Ferroboron should carry little carbon, so Hansen reduced the boron mineral colemanite with silicon instead of coke. The silicon takes the oxygen, joins the lime as a calcium silicate slag, and the boron goes into the iron of the ferrosilicon. Result: ferroboron, low in carbon, under a clean slag. Source: Hansen, US 982,135 (1911). Not given: weights, boron content. Picture drawn by Youblob.
အဆင့်မြင့်
1 day

ညွှန်ကြားချက်များ

1

Dehydrate the colemanite at 450 °C

Heat colemanite to about 450 °C in a suitable container to drive off its water.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ကိုလီမန်းနိုက်ကိုလီမန်းနိုက်1 as required

လိုအပ်သော ကိရိယာများ:

မာဖယ်မီးဖိုမာဖယ်မီးဖို
2

Powder and mix with ferrosilicon

Grind it and mix with powdered ferrosilicon: enough silicon to reduce all the boron and slag off the lime. The amount depends on the silicon content of the ferrosilicon.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ဖယ်ရိုဆီလီကွန်ဖယ်ရိုဆီလီကွန်1 as required

လိုအပ်သော ကိရိယာများ:

ဆုံနှင့် ကျည်ပွေ့ဆုံနှင့် ကျည်ပွေ့
3

Bind and press into pellets

Mix the powder with a binder, e.g. water glass, and press it into pellets.

လိုအပ်သော ကိရိယာများ:

ရေဖန် (ဆိုဒီယမ်ဆီလီကိတ်ဆေးရည်)ရေဖန် (ဆိုဒီယမ်ဆီလီကိတ်ဆေးရည်)
ဆေးလုံးဖိစက်ဆေးလုံးဖိစက်
4

Reduce above 2000 °C

Heat the pellets above 2000 °C, e.g. in a Moissan arc furnace (a ferrosilicon-type resistance furnace also works). Silicon reduces the boron; the calcium silicate slag separates cleanly from the ferroboron.

လိုအပ်သော ကိရိယာများ:

လျှပ်စစ်အာ့ခ်မီးဖိုလျှပ်စစ်အာ့ခ်မီးဖို

ပစ္စည်းများ

2

လိုအပ်သော ကိရိယာများ

5

ဤဘလူးပရင့်က ပြုလုပ်သည်

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...