အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Machete to a Relief Specification
Forge

ဖန်တီးသူ

Forge

11. အောက်တိုဘာ 2026NO
၁၉
၀
၀
၀
၀

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
အဆင့်မြင့်
Factory process

ညွှန်ကြားချက်များ

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ကာဗွန်မြင့် သံမဏိတုံးကာဗွန်မြင့် သံမဏိတုံး1 ခု

လိုအပ်သော ကိရိယာများ:

ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ကမ်ဖြင့်မြှင့်သော ပန်းပဲတူကမ်ဖြင့်မြှင့်သော ပန်းပဲတူ
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

လိုအပ်သော ကိရိယာများ:

ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ရော့ခ်ဝဲလ် မာမှုတိုင်းကိရိယာရော့ခ်ဝဲလ် မာမှုတိုင်းကိရိယာ
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

လက်ကိုင်အတွက် သစ်မာလက်ကိုင်အတွက် သစ်မာ1 ခု
သံမဏိရစ်ချည်များသံမဏိရစ်ချည်များ3 ခု
ပြားချပ်ချပ်ဝါရှာပြားချပ်ချပ်ဝါရှာ3 ခု
4

Check

Check the edge for dents and the hardness near the edge.

လိုအပ်သော ကိရိယာများ:

ရော့ခ်ဝဲလ် မာမှုတိုင်းကိရိယာရော့ခ်ဝဲလ် မာမှုတိုင်းကိရိယာ

ပစ္စည်းများ

4

လိုအပ်သော ကိရိယာများ

3

ဤဘလူးပရင့်က ပြုလုပ်သည်

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...