အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Foundry Hand Ladle: Iron Bowl, Long Shank, Clay Lining
Forge

ဖန်တီးသူ

Forge

14. အောက်တိုဘာ 2026NO
၁၄
၀
၀
၀
၀

Foundry Hand Ladle: Iron Bowl, Long Shank, Clay Lining

A foundry ladle carries molten metal from the furnace to the mould. Small hand ladles look like a kitchen ladle, with a long handle to keep the heat away, a refractory lining inside the metal shell, and a lip to pour from by tilting. Raise an iron bowl with lips, rivet on a long forged shank with a wooden grip, and line it with fire clay. The picture: a moulder pouring into sand moulds from a hand ladle (Safe Foundry Practice, 1920).
အလယ်အလတ်
A day, then drying

ညွှန်ကြားချက်များ

1

Raise the bowl

Cut an iron sheet disc about 24 cm across (our size) and raise it over the forming stake into a deep bowl, annealing as it stiffens. Pull a pouring lip on each side of the rim.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံပြား (တူဖြင့်ထုထားသော)သံပြား (တူဖြင့်ထုထားသော)1 ခု
မီးသွေးမီးသွေး2 as required

လိုအပ်သော ကိရိယာများ:

အချွန်နှစ်ချောင်းပါ ကွန်ပါအချွန်နှစ်ချောင်းပါ ကွန်ပါ
သံပြားညှပ်ကတ်ကြေးသံပြားညှပ်ကတ်ကြေး
ပုံသွင်း ပေတံတိုင်ပုံသွင်း ပေတံတိုင်
မြှင့်တင်တူမြှင့်တင်တူ
ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
2

Shank

Forge a wrought iron shank about 90 cm long (ours), flattened at one end into a strap that fits the bowl.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ထုလုပ်သံချောင်းထုလုပ်သံချောင်း1 m
မီးသွေးမီးသွေး2 as required

လိုအပ်သော ကိရိယာများ:

ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ပန်းပဲခုံပန်းပဲခုံ
ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
ပန်းပဲညှပ်ပန်းပဲညှပ်
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
3

Rivet and grip

Drill and rivet the strap to the bowl. Turn a wooden grip, bore it, and drive it onto the far end of the shank.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံရစ်ချည်များသံရစ်ချည်များ3 ခု
မာကျောသောသစ်သား အစင်းလွှာမာကျောသောသစ်သား အစင်းလွှာ1 ခု

လိုအပ်သော ကိရိယာများ:

လက်တူးစက်လက်တူးစက်
ကန့်လန့်ဖြတ် ချွန်ခေါင်းတူကန့်လန့်ဖြတ် ချွန်ခေါင်းတူ
တံကဲ လှည့်စက်တံကဲ လှည့်စက်
4

Line it

Mix refractory clay stiff with water and press a lining about 1 cm thick inside the bowl, smoothing it round the lips. Dry it slowly, then warm the ladle through before the first pour so no damp is left.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မီးခံ ရွှံ့စေးမီးခံ ရွှံ့စေး1 ကီလို
ရေရေ0.3 လီတာ

လိုအပ်သော ကိရိယာများ:

ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
5

How much metal it holds

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…

ပစ္စည်းများ

7

လိုအပ်သော ကိရိယာများ

12

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...