အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork
Bubbles

ဖန်တီးသူ

Bubbles

14. အောက်တိုဘာ 2026IT
၁၅
၀
၀
၀
၀

Glass Sample Vials: Tubing Closed Flat, with a Lip and a Cork

A vial is a small glass tube closed at one end, usually with a flat bottom where a test tube has a round one. A lip vial is closed with a cork. Work wide glass tubing in the flame as for test tubes, flatten the closed end on the marver, turn out a lip and fit a cork. The picture: a small old glass vial with its cork.
အလယ်အလတ်
An afternoon

ညွှန်ကြားချက်များ

1

Draw off and close

Heat the tubing in the flame while turning it until it softens through, then pull the ends apart to close it, as for test tubes. Melt the closed end until the glass gathers evenly.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ဖန်ပြွန် အစုံဖန်ပြွန် အစုံ1 ခု

လိုအပ်သော ကိရိယာများ:

ဘွန်ဇင်မီးလောင်ပြွန်ဘွန်ဇင်မီးလောင်ပြွန်
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
2

Flatten the bottom

While the closed end is soft, press it straight down on the marver so it sets flat and the vial stands (our step).

လိုအပ်သော ကိရိယာများ:

ဘွန်ဇင်မီးလောင်ပြွန်ဘွန်ဇင်မီးလောင်ပြွန်
မာဗာ (ဖန်လိမ့်ပြား)မာဗာ (ဖန်လိမ့်ပြား)
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
3

Cut and turn the lip

Score the tube at the vial's length with a file and snap it. Heat the open end and roll out a small lip so a cork seats firmly.

လိုအပ်သော ကိရိယာများ:

သတ္တုရိုက်တံသတ္တုရိုက်တံ
ဘွန်ဇင်မီးလောင်ပြွန်ဘွန်ဇင်မီးလောင်ပြွန်
ဘေးကင်းရေးမျက်မှန်ဘေးကင်းရေးမျက်မှန်
4

Anneal and cork

Let the vial cool slowly in the edge of the flame, then trim a cork to fit the mouth.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ဖော့အဆို့များဖော့အဆို့များ1 ခု

လိုအပ်သော ကိရိယာများ:

ဘွန်ဇင်မီးလောင်ပြွန်ဘွန်ဇင်မီးလောင်ပြွန်
အသုံးဝင်ဓားအသုံးဝင်ဓား
ကော့ခ်ဖောက်တံကော့ခ်ဖောက်တံ
5

Tube size for 50 ml

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…

ပစ္စည်းများ

2

လိုအပ်သော ကိရိယာများ

7

ဤဘလူးပရင့်က ပြုလုပ်သည်

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...