အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Gold Pan Raised from Steel Sheet, with Riffles
Forge

ဖန်တီးသူ

Forge

14. အောက်တိုဘာ 2026NO
၂၀
၀
၀
၀
၀

Gold Pan Raised from Steel Sheet, with Riffles

A gold pan is a wide, shallow steel pan, most often 14 inches (36 cm) across, with sides sloping at 30–45°. Shaken under water, heavy grains such as gold sink while light sand washes over the rim; riffles on one side catch the heavy grains. Raise a steel disc to a flat-bottomed pan, wire the rim and hammer riffles into one side. It also serves as a shallow washing basin. The picture: a steel gold pan with gravel, in a washing trough.
အလယ်အလတ်
A day

ညွှန်ကြားချက်များ

1

Cut the disc

Scribe and cut a mild steel disc to the size in step 5.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံမဏိပျော့ ပြားချပ်သံမဏိပျော့ ပြားချပ်1 ခု

လိုအပ်သော ကိရိယာများ:

အချွန်နှစ်ချောင်းပါ ကွန်ပါအချွန်နှစ်ချောင်းပါ ကွန်ပါ
သံပြားညှပ်ကတ်ကြေးသံပြားညှပ်ကတ်ကြေး
2

Raise the pan

Mark the flat bottom, then raise the sides over the stake in rings, annealing whenever the steel stiffens, until they stand at about 40° (our angle). Keep the bottom flat with the mallet.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

မီးသွေးမီးသွေး3 as required

လိုအပ်သော ကိရိယာများ:

ပုံသွင်း ပေတံတိုင်ပုံသွင်း ပေတံတိုင်
မြှင့်တင်တူမြှင့်တင်တူ
သစ်သားတူသစ်သားတူ
ပန်းပဲမီးဖိုပန်းပဲမီးဖို
ဂဟေဆော်လက်အိတ်ဂဟေဆော်လက်အိတ်
3

Wire the rim

Trim the edge level and roll it over a steel wire to stiffen the rim.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

သံမဏိကြိုးသံသံမဏိကြိုးသံ1.2 m

လိုအပ်သော ကိရိယာများ:

သံပြားညှပ်ကတ်ကြေးသံပြားညှပ်ကတ်ကြေး
ပုံသွင်း ပေတံတိုင်ပုံသွင်း ပေတံတိုင်
သစ်သားတူသစ်သားတူ
4

Riffles

Hammer three grooves across one side, over the fuller, to make riffles. File off burrs and wipe the pan with oil against rust.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ပိုက်ဆံစေ့ဆီပိုက်ဆံစေ့ဆီ0.02 လီတာ

လိုအပ်သော ကိရိယာများ:

ဖူလာ (ချောင်ထွင်သံ)ဖူလာ (ချောင်ထွင်သံ)
မြှင့်တင်တူမြှင့်တင်တူ
သတ္တုရိုက်တံသတ္တုရိုက်တံ
5

Disc for a 14-inch pan

Jupyter မှတ်စုစာအုပ် ဖွင့်နေသည်…

ပစ္စည်းများ

4

လိုအပ်သော ကိရိယာများ

9

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...