အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Greensand Casting Sand
Forge

ဖန်တီးသူ

Forge

11. အောက်တိုဘာ 2026NO
၁၉
၀
၀
၀
၀

Greensand Casting Sand

Green sand is moulding sand that is used damp: fine silica sand bound by a little clay and water, so it packs firm round a pattern, holds a sharp shape, and lets steam escape when hot metal is poured. 'Green' means unbaked, not the colour. Bentonite clay is the usual binder; the mix is tempered with water until a squeezed handful holds its shape and breaks cleanly.
အစပြု
1 hour

ညွှန်ကြားချက်များ

1

Sieve the sand

With a dust mask on, sieve dry fine quartz sand to remove stones and lumps.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ကွာ့ဇ်သဲကွာ့ဇ်သဲ20 ကီလို

လိုအပ်သော ကိရိယာများ:

နူးညံ့သော ဇကာနူးညံ့သော ဇကာ
ဖုန်မျက်နှာဖုံးဖုန်မျက်နှာဖုံး
2

Add the clay

Weigh in bentonite at about a tenth of the sand's weight and mix it through dry in the trough until the colour is even.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ဘင်တိုနိုက်ရွှံ့စေးဘင်တိုနိုက်ရွှံ့စေး2 ကီလို

လိုအပ်သော ကိရိယာများ:

အလေးချိန်ချိန်ခွင်အလေးချိန်ချိန်ခွင်
ရောစပ်ရန် ခွက်ရှည်ရောစပ်ရန် ခွက်ရှည်
ဖုန်မျက်နှာဖုံးဖုန်မျက်နှာဖုံး
3

Temper with water

Mist water over it a little at a time, rubbing the sand between your hands and through the sieve to spread the clay and water evenly.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ရေရေ1 လီတာ

လိုအပ်သော ကိရိယာများ:

ရေဖျန်းဘူးရေဖျန်းဘူး
နူးညံ့သော ဇကာနူးညံ့သော ဇကာ
4

Squeeze test

Squeeze a handful. It should hold the print of your fingers and break cleanly in two when bent, not crumble or stick to your hand. Add sand if sticky, water if crumbly.
5

Store damp

Keep it covered in a lidded bucket so it stays damp; re-temper before each use.

လိုအပ်သော ကိရိယာများ:

လက်ကိုင်နှင့် အဖုံးပါ သတ္တုပုံးလက်ကိုင်နှင့် အဖုံးပါ သတ္တုပုံး

ပစ္စည်းများ

3
  • 20 ကီလို
    နေရာယူပစ္စည်း
  • နေရာယူပစ္စည်း
  • 1 လီတာ
    နေရာယူပစ္စည်း

လိုအပ်သော ကိရိယာများ

6

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...