အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Oriented Barium Ferrite Disc Magnet: Water Instead of a Binder (Gorter, Philips 1956, Ex. 5)
Charlie

ဖန်တီးသူ

Charlie

28. အောက်တိုဘာ 2026DE
၃
၀
၀
၀
၀

Oriented Barium Ferrite Disc Magnet: Water Instead of a Binder (Gorter, Philips 1956, Ex. 5)

A ceramic magnet from pre-fired barium ferrite powder stirred into water, oriented in a magnetic field in the die, moulded into blocks and fired as in Example 4. In the principal direction it held 2,870 gauss with a coercive force of 1,610 oersted and a (BH)max of 1.57 × 10⁶; at right angles 1,625 gauss. Source: E. W. Gorter, G. W. Rathenau and A. L. Stuyts (Philips), US 2,762,778 (1956), Example 5. They made blocks; disc size is ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
အဆင့်မြင့်
3 days

ညွှန်ကြားချက်များ

1

Weigh barium carbonate and iron oxide

Weigh 450 g barium carbonate and 2000 g ferric oxide. Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ဘေရီယမ်ကာဗွန်နိတ် (ဝစ်သာရိုက်)ဘေရီယမ်ကာဗွန်နိတ် (ဝစ်သာရိုက်)450 ဂရမ်
ဖယ်ရစ်အောက်ဆိုဒ်ဖယ်ရစ်အောက်ဆိုဒ်2000 ဂရမ်

လိုအပ်သော ကိရိယာများ:

လက်တံညီ ချိန်ခွင်လက်တံညီ ချိန်ခွင်
ရာဘာလက်အိတ်ရာဘာလက်အိတ်
P100 အသက်ရှူကာP100 အသက်ရှူကာ
2

Mill 20 hours under alcohol, dry

Grind the mixture in a ball mill under alcohol for 20 hours, then dry it.

လိုအပ်သော ကိရိယာများ:

သံလုံး ဘောလ်စက်သံလုံး ဘောလ်စက်
အီသနော - ဓာတ်ခွဲခန်းအဆင့်၊ 95 %အီသနော - ဓာတ်ခွဲခန်းအဆင့်၊ 95 %
အခြောက်ခံမီးဖိုအခြောက်ခံမီးဖို
3

Pre-fire: through a 1100 °C zone in 10 minutes

Pass the dry powder at 20 mm per minute through an electric furnace with a 20 cm hot zone at 1100 °C, in air: 10 minutes in the heat. Let it cool.

လိုအပ်သော ကိရိယာများ:

ပြွန်မီးဖိုပြွန်မီးဖို
အဖုံးပါ ပူချက်ခွက် (ကြွေထည်)အဖုံးပါ ပူချက်ခွက် (ကြွေထည်)
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
4

Grind 12 hours with alcohol, dry

Pulverise the pre-fired material in a ball mill with alcohol for 12 hours, then dry it. This is the pre-fired powder.

လိုအပ်သော ကိရိယာများ:

သံလုံး ဘောလ်စက်သံလုံး ဘောလ်စက်
အီသနော - ဓာတ်ခွဲခန်းအဆင့်၊ 95 %အီသနော - ဓာတ်ခွဲခန်းအဆင့်၊ 95 %
အခြောက်ခံမီးဖိုအခြောက်ခံမီးဖို
5

Stir into water

Stir the pre-fired powder with water, 2 cc of water per gram of powder.

လိုအပ်သော ကိရိယာများ:

သန့်စင်ရေသန့်စင်ရေ
6

Orient in a first field and mould

Put the suspension in a moulding die, apply a first magnetic field and mould it into blocks. The patent does not give this field's strength.

လိုအပ်သော ကိရိယာများ:

ဒစ်ပြား ဖိသိပ်ပုံစံခွက်ဒစ်ပြား ဖိသိပ်ပုံစံခွက်
လျှပ်စစ်သံလိုက်လျှပ်စစ်သံလိုက်
ဟိုက်ဒရောလစ် ဖိစက်ဟိုက်ဒရောလစ် ဖိစက်
7

Heat to 500 °C in a 2000 oersted field

Put the block in an electric furnace between the magnet's poles. With a second field of 2000 oersted along the first field's direction, heat to 500 °C, which burns off the rest of the binder. Then switch the field off.

လိုအပ်သော ကိရိယာများ:

ပြွန်မီးဖိုပြွန်မီးဖို
လျှပ်စစ်သံလိုက်လျှပ်စစ်သံလိုက်
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
8

Sinter: through a 1280 °C zone in 5 minutes

Pass the block at 20 mm per minute through an electric furnace in air at 1280 °C with a 10 cm hot zone: about 5 minutes in the heat.

လိုအပ်သော ကိရိယာများ:

ပြွန်မီးဖိုပြွန်မီးဖို
အပူဒဏ်ခံ လက်အိတ်အပူဒဏ်ခံ လက်အိတ်
9

Magnetise in the principal direction

Magnetise the block along the direction of the first field, the principal direction. The patent magnetises it in a field in that direction; ours: an electromagnet. Find the north face with a compass.

လိုအပ်သော ကိရိယာများ:

လျှပ်စစ်သံလိုက်လျှပ်စစ်သံလိုက်
သံလိုက်အိမ်မြှောင်သံလိုက်အိမ်မြှောင်

ပစ္စည်းများ

2

လိုအပ်သော ကိရိယာများ

14

ဤဘလူးပရင့်က ပြုလုပ်သည်

ဆက်စပ် အစီအစဉ်များ

ဤအစီအစဉ်များသည် အသိပညာမျှဝေသည် — နည်းပညာ၊ ပစ္စည်း သို့မဟုတ် မူများ

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...