ပူးပေါင်းဆောင်ရွက်ခြင်း
အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Platinum Crucible: Shaped from Foil in a Hollow in a Board (Morfit, 1849)
Charlie

ဖန်တီးသူ

Charlie

7. နိုဝင်ဘာ 2026DE
၄
၀
၀
၀
၀

Platinum Crucible: Shaped from Foil in a Hollow in a Board (Morfit, 1849)

A small platinum crucible for igniting precipitates at high heat. Campbell Morfit (1849): "The experimenter himself can in any emergency readily form a crucible out of platinum foil by shaping it with the thumb or a small hammer, in a hemispherical cavity made in a board for the purpose." Platinum crucibles must be of pure metal and hammered, not turned; thin enough to weigh on a delicate balance. Foil thickness and the size of the hollow are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 196-197. Picture: Fig. 164.
အစပြု
Unknown

ညွှန်ကြားချက်များ

1

Read Morfit

"The experimenter himself can in any emergency readily form a crucible out of platinum foil by shaping it with the thumb or a small hammer, in a hemispherical cavity made in a board for the purpose."
2

Make the hollow

Cut a hemispherical cavity in a board, the size of the crucible wanted. Morfit's crucibles hold from a fluidrachm to three fluid ounces; a half-ounce one is the most needed in analysis. How the cavity is cut is not given (ours: a gouge in a hardwood board).

လိုအပ်သော ကိရိယာများ:

သစ်မာပျဉ်ပြားသစ်မာပျဉ်ပြား
အကွေးဆောက်အကွေးဆောက်
မသိရှိသေးသော အတိုင်းအတာများမသိရှိသေးသော အတိုင်းအတာများ
3

Shape the foil

Lay a piece of pure platinum foil over the hollow and press it in with the thumb, or work it in with a small hammer, until it takes the hemispherical shape. The foil thickness, and how the foil is made, are not given (unknown).

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ပလက်တီနမ်ပလက်တီနမ်1 foil

လိုအပ်သော ကိရိယာများ:

သစ်မာပျဉ်ပြားသစ်မာပျဉ်ပြား
လုံးဝိုင်းခေါင်းတူလုံးဝိုင်းခေါင်းတူ
မသိသော ပုံသွင်းနည်းမသိသော ပုံသွင်းနည်း
4

Care of the crucible

Blisters and flaws that appear after use come from impure metal and bad workmanship; remove them by the force of a small hammer. Loosen salts with boiling water and rub off stains with sand or pumice stone. Do not use sharp pointed instruments on it.

လိုအပ်သော ကိရိယာများ:

လုံးဝိုင်းခေါင်းတူလုံးဝိုင်းခေါင်းတူ

ပစ္စည်းများ

1
  • နေရာယူပစ္စည်း

လိုအပ်သော ကိရိယာများ

5

ဤဘလူးပရင့်က ပြုလုပ်သည်

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...