အနုပညာ
အလှအပနှင့် ကျန်းမာရေး
လက်မှုအနုပညာ
ယဉ်ကျေးမှုနှင့် သမိုင်း
ဖျော်ဖြေရေး
ပတ်ဝန်းကျင်
အစားအစာနှင့် အချိုရည်
ပြောင်းပြန်အင်ဂျင်နီယာပညာ
သိပ္ပံပညာများ
အားကစား
နည်းပညာ
ဝတ်ဆင်နိုင်သောပစ္စည်းများ
Polypropylene Felt: a Spunbonded Web, Kinney 1967
Tex

ဖန်တီးသူ

Tex

18. အောက်တိုဘာ 2026FO
၆
၀
၀
၀
၀

Polypropylene Felt: a Spunbonded Web, Kinney 1967

A polypropylene felt made without weaving or needling: hot filaments are spun, pulled down by an air jet, given an electric charge so they spread apart, and laid in loops on a moving table until they form an even sheet. Kinney's patent (Du Pont, US 3,338,992, 1967) gives every setting for polypropylene. The corona runs at 20 to 25 kV: keep clear of it while it is live. The picture: the patent's own Fig. 1 (the process) and Fig. 7 (the web).
အဆင့်မြင့်
1 day

ညွှန်ကြားချက်များ

1

Melt and spin

Melt polypropylene of melt index 10 in a screw extruder, no hotter than 290 °C. Meter it at 12 g a minute through a 1/4 in. sand filter and a 20-hole spinneret (holes 0.015 in. across): pack block 275 °C, spinneret 260 °C.

ဤအဆင့်အတွက် ကုန်ကြမ်းများ:

ပိုလီပရိုပလင်း အစေ့များပိုလီပရိုပလင်း အစေ့များ500 ဂရမ်

လိုအပ်သော ကိရိယာများ:

ပလတ်စတစ် ထုတ်ဖော်စက်ပလတ်စတစ် ထုတ်ဖော်စက်
အမျှင်ထုတ် အပေါက်ပြားအမျှင်ထုတ် အပေါက်ပြား
ပိုင်ရိုမီတာပိုင်ရိုမီတာ
လက်တံညီ ချိန်ခွင်လက်တံညီ ချိန်ခွင်
သားရေ လက်အိတ်သားရေ လက်အိတ်
2

Quench

Cool the bundle of filaments in a 6 in. quench chimney blowing 40 cubic feet a minute of room air in from the side.

လိုအပ်သော ကိရိယာများ:

လေဖိစက်လေဖိစက်
3

Draw with the air jet

Lead the bundle 72 in. down into an air draw jet run at 25 psi: it pulls the filaments with about 3 g of tension and stretches them.

လိုအပ်သော ကိရိယာများ:

လေဖြင့် ဆွဲဆန့်သော ဂျက်လေဖြင့် ဆွဲဆန့်သော ဂျက်
လေဖိစက်လေဖိစက်
ဖိအားတိုင်းကိရိယာဖိအားတိုင်းကိရိယာ
4

Charge the filaments

8 in. above the jet, let the filaments brush a 1 1/4 in. bar turning at 10 rpm, with a four-point corona 5/8 in. from it at minus 20 to 25 kV (100 to 150 µA). The charge pushes them apart. Keep clear while it is live.

လိုအပ်သော ကိရိယာများ:

ကိုရိုနာ လျှပ်စစ်သွင်း ယူနစ်ကိုရိုနာ လျှပ်စစ်သွင်း ယူနစ်
5

Lay the web

Catch the filaments on a grounded 47 in. square table that moves 26 in. a minute one way and 570 in. a minute the other. Each layer weighs 0.5 oz per square yard; lay several for each sheet.

လိုအပ်သော ကိရိယာများ:

ချထားသည့် စားပွဲချထားသည့် စားပွဲ
6

What you get

An even sheet of fine filaments, about 2.5 denier each, tenacity 2.0 g per denier, stretching 300 % before they break.

လိုအပ်သော ကိရိယာများ:

လက်တံညီ ချိန်ခွင်လက်တံညီ ချိန်ခွင်

ပစ္စည်းများ

1

လိုအပ်သော ကိရိယာများ

10

CC0 အများပိုင်

ဤအစီအစဉ်ကို CC0 အောက်တွင် ထုတ်ဝေထားသည်။ ခွင့်ပြုချက်မလိုဘဲ ကူးယူ၊ ပြင်ဆင်၊ ဖြန့်ဝေ နှင့် အသုံးပြုနိုင်သည်။

အစီအစဉ်မှတစ်ဆင့် ကုန်ပစ္စည်းများဝယ်ယူ၍ လက်မှုပညာရှင်ကို ပံ့ပိုးပါ လက်မှုပညာရှင် ကော်မရှင် ရောင်းချသူက သတ်မှတ်သည်၊ သို့မဟုတ် ဤအစီအစဉ်၏ ဗားရှင်းအသစ်ဖန်တီး၍ ဝင်ငွေခွဲဝေရန် သင့်အစီအစဉ်တွင် ချိတ်ဆက်မှုအဖြစ် ထည့်သွင်းပါ။

ဆွေးနွေးချက်

(0)

ဝင်ရောက် ဆွေးနွေးချက်တွင် ပါဝင်ရန်

မှတ်ချက်များ ရယူနေသည်...